Tree Sling'r
Addicted to ArboristSite
Glad I could help.
Pretty amazing Brad, thanks again.
Glad I could help.
I read more than I post. Ears open , mouth shut kinda thing.
Here's the 024 that barneyrb donated. Before shipping it, I went over it to make sure everything was squared away. It's a very nice little saw!
I pulled the P&C and decarboned the crown and combustion chamber. I then removed and inspected the fuel line, impule hose, and intake boot. They were all in great shape. The carb took a trip through the ultrasonic cleaner. I dressed the rails on the bar and sharpened the chain. I also threw in a "new" chain that has only been sharpened once. The saw runs great. The only thing it will need before I ship it off is a new air filter.
I'll take the Homelite C-71.
Thanks :biggrinbounce2:
I pulled the P&C and decarboned the crown and combustion chamber.
What do you use to do that?
Wire brush.
rburg wants that stihl bar, so I guess the two 24" bars from Anthony are left? I actually could use 24's, I don't have any, but would like to know what mount they are first to see if they might fit what I have. I have need for old poulan or echo, d176, or large mount husky d009. Sorry for delay in game.
Hey bud. I wanted to tell you more about those two bars. They are actually a 25" Stihl ES bar in 3/8th-.050, and a 28" GB Ti in 3/8th-.050 Stihl mount. Theres pics of them in this thread somewhere.
They'll both fit LM Husky with the adapter from Baileys.
Hope this helps.
Thanks for the info! And thanks for donating!
Enter your email address to join: