I'd bet the bar and chain could be fixed up with little effort. I'm not good at throwing serviceable parts away!Throw the bar, chain, clutch sprocket and bar nuts in the recycle bin and start fresh if you plan to keep it.
I'd bet the bar and chain could be fixed up with little effort. I'm not good at throwing serviceable parts away!Throw the bar, chain, clutch sprocket and bar nuts in the recycle bin and start fresh if you plan to keep it.
Try WSE above. I mean a page backChecked compression and pulled the muffler this morning. Still cleaning it up as much is practical--not wanting to spend too much time on it. Ordered a factory bar that was unused off EBay for $22, and I already have a spare chain for it. Will order tensioner and new sprocket later. What's the best place to order Echo parts (I don't have dealer close by)?
mine is a good machine................... i only made one cut with mine before i got it portedPicked up the saw today.. It is dirty as all get out, but it looks like it will clean up well. Started on the first pull, and nothing is broken. Just the usual scratches and nicks in the plastic from use. The original bar has been replaced with an Oregon bar, as he said they accidentally bent the factory bar the first day he used it.
I wasn't expecting to meet the guy today, so I didn't have my compression gauge or a T 27 driver to pull the muffler, so I went ahead and took a gamble that it's got good compression and the piston looks good.
The guy said he bought it at Home Depot, and he still had the original box and accessories.
Pictures to follow. Hopefully I can get a chance to go over everything real well tonight.
sometime i want a new stock one too it will get a MM and thats allmine is a good machine................... i only made one cut with mine before i got it ported
I have yet to MM my 600sometime i want a new stock one too it will get a MM and thats all
600's dang good saws stock i havnt got to run a 620 yet, hope your doing well ShawnI have yet to MM my 600
Life is good up here600's dang good saws stock i havnt got to run a 620 yet, hope your doing well Shawn
good down here too......Life is good up here
The 590 is the Best saw per dollar in the industry period. There's not even anything close. Face it Echo bashers. Echo has proven in recent years it is a force to be recon with in the chainsaw division.
Man thats a shame.For the dollar , it's the importer.
Here in europe there to expensive
Retail 929€ thats 984 dollars , cheapest online 729€
In a good shop you find for 829€ a 372 xtorq with 4 chaines free.
A 550xp in the stores is around 660€
A pity would buy Echo when they where the same price as in the states......
its good, I was breaking it in on the 500 evl before the ignition quit all that stuff is nlaHow's that bar working for you?
My dealer has a 620PW w/ a 24" on it for $659 out the door. It's tempting, but cash flow ain't there.
Enter your email address to join: