Ouch, do those have plastic crankcase ?Unless the Echo has a plastic crankcase I don't see how it can be more plasticy than the 6100.
Ouch, do those have plastic crankcase ?Unless the Echo has a plastic crankcase I don't see how it can be more plasticy than the 6100.
The 6100 doesn't, but everything else is plastic.Ouch, do those have plastic crankcase ?
Has the same power as the 6100!I nixed the used 6100 and just picked up a new 550xp MK II
It's been a while since had one. I didn't keep it long because I found the 6400 and wanted it because of the better optionsThe 6100 doesn't, but everything else is plastic.
How much was that?I nixed the used 6100 and just picked up a new 550xp MK II
Paid $704 for saw, one gallon of fuel (to extend warranty to 5 years) and an extra chain.How much was that?
Those are fuel injection?Paid $704 for saw, one gallon of fuel (to extend warranty to 5 years) and an extra chain.
Not fuel injected but autotune like the Stihl Mtronic.Those are fuel injection?
The 590 Timberwolf sold at Home Depot has a magnesium split case.Ouch, do those have plastic crankcase ?
After dealing with gm transfer case pump rub I hate magnesium.The 590 Timberwolf sold at Home Depot has a magnesium split case.
All pro saw cases are made of magnesium. But I feel your pain.After dealing with gm transfer case pump rub I hate magnesium.
I thought at least some were using aluminum. Magnesium seems to pit really easy and corrodeAll pro saw cases are made of magnesium. But I feel your pain.
I know at least some of the Shindaiwa saws were aluminium.I thought at least some were using aluminum. Magnesium seems to pit really easy and corrode
Definitely worth the price. Check to make sure it has the correct new bar. The saw has a label right by the trigger with the correct bar part no. The store had put an old 6421 bar on the 6100 I bought used. It runs and cuts fine, but the oil port does not match up - so it wouldn't oil. $45 for the correct bar. Also, the case at the recoil attachment bolt hole was cracked. Didn't see that until much later. Doesn't appear to affect anything, and I don't know if that is a typical issue with the 6100 or just this saw.I spoke to them this morning. They said the saw was in good shape and ran well and has a new bar snd chain on it. They dropped the price to $275 for me since I told them I was over an hour away. It’s very tempting.
Enter your email address to join: