If your chainsaw were a gun what kind and why?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bigw

ArboristSite Lurker
Joined
Jan 21, 2012
Messages
39
Reaction score
3
Location
hayfork,ca
I think My ms-250 would be a Glock 26,It's tiny compact and light but still gets the job done. On the other hand I think My MS 460 would be more like a 1911... a time tested classic you can always depend on, with plenty of options for upgrades.
 
me ms261 masterminded would be a 357sig why because it is compact and will drop things out of all proportion to it's size
lol:surrender:
 
660 would be a 416 Barrett. 345 would be a 9mm of some sort, not as simple as a Kahr, but not overly complex or spendy either. Of course with a 14" bar the 660 would be a hand cannon like my 454 casull and it would probably kick-back about the same too.
 
My 346 would be a .243 . lightweight and fast , with unparalleled versatility for almost any game on this continent .
The Super 754 would be a .45/70 . Old , slow and BIG .
272/371 would have to be a .300 Win Mag .
 
Last edited:
660 would be a 416 Barrett. 345 would be a 9mm of some sort, not as simple as a Kahr, but not overly complex or spendy either. Of course with a 14" bar the 660 would be a hand cannon like my 454 casull and it would probably kick-back about the same too.

So if a 660 with a 14in bar is a 454 casull, what would a 290 with a 20in B&C be??? I'm thinking 9mm Hi-Point or a Slingshot:hmm3grin2orange:
 
I like that analogy a lot. 16" for small stuff, yet plenty capable for medium sized stuff with a 20". I use a .243 as well.
The .243 is very under-estimated. I had a BSA Majestic with a Redfield scope that would drive a 100 gr Nosler through 3/8 steel plate at 100 yards. (I still hid behing the truck though lol)
 
Last edited:
Id say my 038s is a 30:06 lever action. It is under rated, by no means high tech, high speed or low drag but very stout and not often mentioned in the same breath as flavor of the week saws or guns
 
Last edited:
044 "Christine" = Winchester Model 94, 30-.30
Time tested

346XP = Ruger MKII MK77 w/ Leupold 3x9, 6mm Remington
Small but fast......really fast

6mm is pretty much a .243 on steroids.
Same .243 projectile sitting in a larger casing
 
Last edited:
my 84 would be something like a .308 mabe a 7mm rem. mag. my 076 is like my .44 mag it goes every where with me, a little big but manageable
 
MS261=7mm.Rem.magnum

I would draw a parallel between the MS261(muff mod) & my 7mm.Rem.magnum which has been accurate enough for crows at well beyond 300yds. & powerful enough for Canada & Alaska-Yukon moose at the same range. Another good comparison would my MS201 & .222Rem. which has accounted for several red foxes as well as woodchucks, crows, & 'coons at ranges up to 250yds.
 
My 660 would be my .300 win mag dont need it but i have it
My 044 would be like the 30-06 take down power is bountiful
the dolmar 5105 would be like my ruger 10/22 fast and snippy
those are just three combos
 
These 2 dont really compliment eachother, but bringing out the ol' 026 and 8mm mauser both give me that fuzzy feeling ;)
 

Latest posts

Back
Top