bryanr2
Addicted to ArboristSite
:monkey: Hot Dam I did it!
MS261 VS MS261 C-M Comparison
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
- Status
SierraWoodsman
ArboristSite Guru
:monkey: Hot Dam I did it!
I thought this thread was pointing to an upcoming/updated 50cc shootout thread, Right?:msp_confused:
Mastermind
Work Saw Specialist
It is. But when I send out the OE model it was wearing my intake.......I've got Wiggs picking me one up. Hopefully we'll get it this year.
Oh.......your saws left here today.
SierraWoodsman
ArboristSite Guru
Oh, I see....Looking forward to that thread.
On the saws, thank you Randy! That's Awesome.
I just got the shipping notification from Fed-EX.
I'm surprised you got them all back in that Coleman cooler?
I'm looking forward to running my first ported saws!
On the saws, thank you Randy! That's Awesome.
I just got the shipping notification from Fed-EX.
I'm surprised you got them all back in that Coleman cooler?
I'm looking forward to running my first ported saws!
Mastermind
Work Saw Specialist
Oh, I see....Looking forward to that thread.
On the saws, thank you Randy! That's Awesome.
I just got the shipping notification from Fed-EX.
I'm surprised you got them all back in that Coleman cooler?
I'm looking forward to running my first ported saws!
We had to put a layer of foam padding on top of the three bottom saws and then put the 550 on top of that. They're in there like a hair in a biscuit.
SierraWoodsman
ArboristSite Guru
I figured it'd be tight fit. Thought maybe I'd try a flush cut on the 390, since you said you would have to remove the full-wrap anyways.
Mastermind
Work Saw Specialist
I didn't have to remove it.
brian99574
ArboristSite Operative
update on oe 261
I received the carbed version 261 in this shootout this past Saturday. I've been so busy cutting with it everyday I forgot to write about it. Its my first ported saw and im thoroughly impressed. It has replaced for stock 460 for anything 20" and smaller. By far the funnest saw I've ever run. I'll never own a stock saw again. I like it so much I just purchased a 064 with 066 top end on ebay that Randy worked on. Looking forward to playing with that one next week. My 460 is next to get Masterminded. So far I've cut a little more than a cord of firewood with the 261 and look forward to cutting many more. Anyone whose thinking of pulling trigger on the same saw, do yourself a favor and buy one already. After Randy is done with it you'll wonder how you went so long without one. Thanks again Randy!
I received the carbed version 261 in this shootout this past Saturday. I've been so busy cutting with it everyday I forgot to write about it. Its my first ported saw and im thoroughly impressed. It has replaced for stock 460 for anything 20" and smaller. By far the funnest saw I've ever run. I'll never own a stock saw again. I like it so much I just purchased a 064 with 066 top end on ebay that Randy worked on. Looking forward to playing with that one next week. My 460 is next to get Masterminded. So far I've cut a little more than a cord of firewood with the 261 and look forward to cutting many more. Anyone whose thinking of pulling trigger on the same saw, do yourself a favor and buy one already. After Randy is done with it you'll wonder how you went so long without one. Thanks again Randy!
Mastermind
Work Saw Specialist
Thanks for the kind words Brian. Enjoy it my friend.
261 from Randy was my first ported saw too. I had the same sentiments as you. It cuts like a bigger than it is. Only down side is much like you I wont own another stock saw...
Mastermind
Work Saw Specialist
I've got a 10" X 10" and Steven's 2153 that I ported.....a ported 2253, and last night, I got my MS261C finished.....
Last edited:
just wait till you get a masterminded 460 mine is an animal
Mastermind
Work Saw Specialist
How many hours does that saw have on it now ya think?
hours ?? but it has cut 70 cubic meters of hard aussie wood
Last edited:
Mastermind
Work Saw Specialist
Is that a lot?
Trx250r180
Saw polisher
i think it may be about 19-20 cords sir ,i may be wrong though ,i have been before
Last edited:
Hedgerow
HACK
Bout 4-5 months worth of firewood sales...
So yeah... Good bit of cutting time...
Now if he noodled all of it, that would be an ASSLOAD of fuel and time...
And stuff...
:msp_wink:
Mastermind
Work Saw Specialist
I was wondering about that saw especially because it has more compression than my "normal" work saw builds. It's blowing about 225psi.
Last edited:
I've got a 10" X 10" and Steven's 2153 that I ported.....a ported 2253, and last night, I got my MS261C finished.....
Which one is faster........jus sayin.....
- Status
