Hey Andre...Mr Beast...you better be tunin' up that mighty 372 of yours! I'm coming after ya!:greenchainsaw:
Do your neighbors give you any problems over all the noise?
Not yet, lol. I try not to run them too late or too early. I also try to befriend them and help them out every now and then with odds and ends. And I tell them it's a peace offering for putting up with the saws
The muffler mod is done. I extended the factory deflector, so as to keep the finish on the case and clutch cover from burning and turning black. I then blended the factory deflector under the new one so that it has a nice smooth transition. I also significantly opened up the port underneath, more than you could without extending the deflector. I tuned the saw to 13,000, where it is still considerably rich. I'll probably leave it there for a tank or two. These cuts are the first since the single cut I made with it last night. Yes, I'm babying this one a little
<object width="640" height="360" ><param name="movie" value="http://photo.blsnelling.com/ria/ShizVidz-2010012201.swf" /><param name="allowFullScreen" value="true" /><param name="flashVars" value="s=ZT0xJmk9ODA3ODE1NjUyJms9M0F1alYmYT0xMTQ3NTk4OF9wcUdzVyZ1PVR3ZWFrZXI=" /><embed src="http://photo.blsnelling.com/ria/ShizVidz-2010012201.swf" flashVars="s=ZT0xJmk9ODA3ODE1NjUyJms9M0F1alYmYT0xMTQ3NTk4OF9wcUdzVyZ1PVR3ZWFrZXI=" width="640" height="360" type="application/x-shockwave-flash" allowFullScreen="true"></embed></object>
I was wondering about the neighbors too. I'm glad my neighbors aren't that close. I think my neighbor goes into heat when he hears a saw start
Doesn't sound rich to me mang. . . Cleans right up in the cut.
Doesn't sound rich to me mang. . . Cleans right up in the cut.
I expect it to turn 14,000 once I lean it out a little more. With a stock muffler, spec is 13,500. I'll wait a couple tanks to do that though.
yep
Why 14K? It sounds plenty happy at 13k to me. 4 strokes and cleans up...what's not to love??
I expect it to turn 14,000 once I lean it out a little more. With a stock muffler, spec is 13,500. I'll wait a couple tanks to do that though.
I just checked squish and compression, .024" and just shy of 150 PSI. The plan is to put a popup in it and set squish about .018".
Is Nik still turning your pop-ups for you?
That squish is fairly tight already. . . A guy would expect taller on a 440 or 066, but that 066 I just did was .024" as well with factory gasket. .018" should bump that saw up nicely.
14,000 sounds about right. . . I've seen a 500-800 rpm gain from muffler mods as kind'a an average.
No fears. It'll be turning 15,500-16,500 soon enough Stipes is a blubbering pig at 15,000!
...and dont cheat!!! LOL!!!!
Yes he is. BTW, I've seen .017" with a gasket on my 066. I've had no problems with it. So I have no concerns at all with .018" on a 440.
WOW! Dang, they really got that 066 close?
You've set a bunch of you saws' at .018" IIRC. . . I didn't think you'd have an issue.
Hey Andre...Mr Beast...you better be tunin' up that mighty 372 of yours! I'm coming after ya!:greenchainsaw:
My 660 won't even turn over with the gasket out..
.
Enter your email address to join: