Haywire Haywood
Fiscal Conservative Social Retard
Kevin, you are correct. All the fittings on both the cylinder and the valve are 1/2" pipe thread. I ordered some 1/2 to 3/4 straight adapters and will just have the hose shop use 3/4" 90 deg swivel fittings for hose ends.
I'm going to have to fiddle with the governor on the engine some.. it only runs about 3300 with the screw adjustment maxed out. Thumb it over and it shoots up over 4k, I'd like to see about 3600. If it weren't an older engine without the benefit of full pressure lubrication, I'd be tempted to run it up to 3800. I think the pump is rated for 4k.
Ian
I'm going to have to fiddle with the governor on the engine some.. it only runs about 3300 with the screw adjustment maxed out. Thumb it over and it shoots up over 4k, I'd like to see about 3600. If it weren't an older engine without the benefit of full pressure lubrication, I'd be tempted to run it up to 3800. I think the pump is rated for 4k.
Ian