Stihls FS

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jazak

ArboristSite Operative
Joined
Feb 8, 2006
Messages
285
Reaction score
2
Location
NJ
Have the following FS let me know what you want:

2X 044 2x 18" bars 1x 28" bar used once both for $800
2x 020T 2x 14" bars both for $600
1x BR-400 $250.00
Echo SRM-210 & Echo HC-1500 w/ two sets of blades both for $250.00

Will split up the stuff, also have pics.
 
Here they are. Sorry about the clarity but when you downsize them the get real blury. If give me your email adress I can send you better ones.
 
Last edited:
Here are some more.
 
Last edited:
Rockaway, NJ 07866 I'm 2 minutes off route 80.
 
20t saw

jazak said:
Have the following FS let me know what you want:

2X 044 2x 18" bars 1x 28" bar used once both for $800
2x 020T 2x 14" bars both for $600
1x BR-400 $250.00
Echo SRM-210 & Echo HC-1500 w/ two sets of blades both for $250.00

Will split up the stuff, also have pics.
will u sell 1 20t
 
Nope. But I will sell a 044 & 020T together for $625
 
what is the cfm on the br400? .....and tell me more about it, like condition, what it needs, how old it is, what performance i can expect.
thanks
 
Vman said:
what is the cfm on the br400? .....and tell me more about it, like condition, what it needs, how old it is, what performance i can expect.
thanks

I think the cfm is around 475. It was NEVER used commercaily, its 5 years old, runs like new just used it the other day to blow off my lawn and steps and has the same power as when I bought it. There was nothing replaced on it because of such little use on it there is no need for anything to be replaced yet. There are no dents or cracked pieces the paint is still real good and the blower was garge kept so it has never been rained or snowed on. I'm asking $250 for it which is about $200 less then to go get a BR-380 which replaces this model. If you have an email I can send you better pics of it. If you have more questions let me know. Thanks
 
hi, i was thinking that the cfm on your blower was higher than my BG85, but it is just about the same, so i'm gonna pass.
thanks for the replies.
 
No problem

BG-85D 314cfm
BR-400 475cfm

I WILL SPLIT UP THE SAWS.

044s $400 each
020Ts $300 each
 
not to be a wise-guy, but check the specs u posted on the BG85...
it is ....
447 cfm with the round tube (just 28 cfm less than your br400)
341 cfm if u use the flat tube (u posted 314...and i assume u wanted to post the flat tube specs since it was the lower of the 2 ).

so a 28 cfm increase to the br400 is definitley not enough to warrant buying your br400.
thanks
 
Vman said:
not to be a wise-guy, but check the specs u posted on the BG85...
it is ....
447 cfm with the round tube (just 28 cfm less than your br400)
341 cfm if u use the flat tube (u posted 314...and i assume u wanted to post the flat tube specs since it was the lower of the 2 ).

so a 28 cfm increase to the br400 is definitley not enough to warrant buying your br400.
thanks


Okay I just checked online, you're correct. The numbers I got were from their 05 cataolge I had laying around they must have upped the cfm a little sorry for the wrong specs.
 

Latest posts

Back
Top