Mastermind
Work Saw Specialist
Yer PM box is full....... :cool2:
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Yer PM box is full....... :cool2:
Mastermind
Work Saw Specialist
Tony,
I think i might be able to help. I have some NOS stuff from a dealer sell out - I will dive in tonight and let you know.
Randy, thanks! Your husky cover is flying over Tahiti at the moment.
Still looking for a fw side case for a 660 (large oil tank) to match this:
Al.
"The Wiggs" ain't got one Al?????
Nardoo
Addicted to ArboristSite
Thanks Randy, I am gonna ask him.
wigglesworth
Booned
Ill have to dig Al. Ive got a crap pile of cases, but lots of em busted. It's a poly saw, right?
Freakingstang
Doctor Freakinstein
I have a low hour 460 that was run over. Mint piston/cylinder... what kind of 066 parts?
Nardoo
Addicted to ArboristSite
Jeremy, it is a 660 with a big oil tank. Thanks :msp_smile:
wigglesworth
Booned
I bought a real nice case on eBay last year some time. I don't remember using it, but its probably buried. :/
Freakingstang
Doctor Freakinstein
Bars for sale or trade?!
Have a bunch of bars that I'll never use...
16" small husky/dolmar/partner roller mount bar. Used for GTG's/ 60DL .050 gauge
18" small husky/dolmar/partner roller nose bar. 050 gauge
20" Oregon Supertronic Roller nose small husky/dolmar/partner mount. New old stock .050 gauge
18" Stihl mount 3" Rollernose bar, 3/8 050.
17" oregon roller nose. 058 gauge.
25" Oregon 063 gauge Roll-O-tronic. New Old Stock, homelite mount?
23-24" Remmington roller nose. Homelite mount? .058 gauge
Big husky monut brand new bars,
15" Carlton 3/8 058 56DL new
15" Oregon older 3 rivet tip 3/8 058 New
16 Windsor Speed Tip 3/8 050 60 DL
Used 16" oregon Powermatch 3/8 050 60DL
Small husky/dolmar/partner K095 mount:
16" NEW Oregon Powermatch 3/8 050 60DL
15" Dolmar 3/8 050 56DL new old stock
15" Sachs Dolmar 3/8 050 56DL new old stock
16 NEW Windsor Speed Tip 3/8 050 60DL
Have a bunch of bars that I'll never use...
16" small husky/dolmar/partner roller mount bar. Used for GTG's/ 60DL .050 gauge
18" small husky/dolmar/partner roller nose bar. 050 gauge
20" Oregon Supertronic Roller nose small husky/dolmar/partner mount. New old stock .050 gauge
18" Stihl mount 3" Rollernose bar, 3/8 050.
17" oregon roller nose. 058 gauge.
25" Oregon 063 gauge Roll-O-tronic. New Old Stock, homelite mount?
23-24" Remmington roller nose. Homelite mount? .058 gauge
Big husky monut brand new bars,
15" Carlton 3/8 058 56DL new
15" Oregon older 3 rivet tip 3/8 058 New
16 Windsor Speed Tip 3/8 050 60 DL
Used 16" oregon Powermatch 3/8 050 60DL
Small husky/dolmar/partner K095 mount:
16" NEW Oregon Powermatch 3/8 050 60DL
15" Dolmar 3/8 050 56DL new old stock
15" Sachs Dolmar 3/8 050 56DL new old stock
16 NEW Windsor Speed Tip 3/8 050 60DL
Have a bunch of bars that I'll never use...
16" small husky/dolmar/partner roller mount bar. Used for GTG's/ 60DL .050 gauge
18" small husky/dolmar/partner roller nose bar. 050 gauge
20" Oregon Supertronic Roller nose small husky/dolmar/partner mount. New old stock .050 gauge
18" Stihl mount 3" Rollernose bar, 3/8 050.
17" oregon roller nose. 058 gauge.
25" Oregon 063 gauge Roll-O-tronic. New Old Stock, homelite mount?
23-24" Remmington roller nose. Homelite mount? .058 gauge
Big husky monut brand new bars,
15" Carlton 3/8 058 56DL new
15" Oregon older 3 rivet tip 3/8 058 New
16 Windsor Speed Tip 3/8 050 60 DL
Used 16" oregon Powermatch 3/8 050 60DL
Small husky/dolmar/partner K095 mount:
16" NEW Oregon Powermatch 3/8 050 60DL
15" Dolmar 3/8 050 56DL new old stock
15" Sachs Dolmar 3/8 050 56DL new old stock
16 NEW Windsor Speed Tip 3/8 050 60DL
Interested in the small mount Husky bars. But your box is full. LOL
Nardoo
Addicted to ArboristSite
Well go dig! I got some real desirable swapping parts like a NOS 040 heated bars generator, a worn choke flap for a Wildthing, some (over) heat treated sprockets and even a NOS Dolmar CC piston. And some lesser stuff...:msp_smile:
Al.
Pm scent. 20'' roller nose and windsor ko95. and maybe a 16"" roller nose.
wigglesworth
Booned
any one have a spare or know the part/tool number for the tool to pull small crank case seals???
Edit: found the stihl part number but $170 for a seal puller seems steep! anyone know of a good seal puller I can buy that will do the job on some 026's? they have those tiny FW side crank seals...
Stihl PN: 5910 890 4400
Edit: found the stihl part number but $170 for a seal puller seems steep! anyone know of a good seal puller I can buy that will do the job on some 026's? they have those tiny FW side crank seals...
Stihl PN: 5910 890 4400
Last edited:
o8f150
Tree Freak
Warped5
WingNut
Nathan - Shoot blsnelling a PM ... I think he posted a thread on one some time back.
that's a thread I found... http://www.arboristsite.com/chainsaw/195743-2.htm
reading and looking at options in the links now... I guess I was more intereseted if someone knows if an AM puller will work on the tiny FW side seals on the 026/024/036?
I use a Lisle with the lip ground down some on the 024/026, works fine. Most of the time a drywall screw is even easier.
Last one I did I used a hook tool of some sort, I just forget what exactly. It is possible to shift them with just low buck tools, cause I've done it and I ain't that smart. :rolleyes2:
I use a Lisle with the lip ground down some on the 024/026, works fine. Most of the time a drywall screw is even easier.
Or maybe that's what I used, I do have one of those. :msp_smile:
Warped5
WingNut
Similar threads
