Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
this is addictive!

I have a 20" b&c off of my Kita 6401 with very little use and only one sharpening ( my first attempt at hand sharpening and never tried it out ).

According to Bailey's it will fit the following:


•Dolmar PS-6400, PS-7300, PS-7900, PS-9000, PS-9010FL
•Efco 181 (Newer Models from Aug 2007+), MT 7200, MT 8200
•Husqvarna 61, 65, 66, 70, 77, 160, 162, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 Lite, 298, 365, 371, 372, 380, 385, 390, 394, 395, 480, 570, 575, 576, 1100, 2100, 2101, 3120, Jungle 3120
•Jonsered 625, 630, 630 SUPER, 630 WEST COAST, 670, 670 WEST COAST, 2065, 2071, 2077, 2083, 2094, 2095, 2163, 2165, 2171, 2186, RIPPING MILL
•Makita DCS 6401, DCS 6800, DCS 7301, DCS 7901, DCS 9000, DCS 9010FL
•Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
•Poulan PRO 415, 425, 445, 475, 505
•Shindaiwa (SDK) 550, 575, 577, 680, 695, 757
•Solo 603, 662, 665, 667, 670, 675, 680, 681, 690, 694


And with a torch, drill, or JB weld it should fit just about anything else!!!

If I should trade this off I'm looking for some chain. Is 2 3/8 .050 84dl skiptooth semi chisel ( woodland pro works ) chains too much? or I'd even go 1 3/8 .050 sq chisel skiptooth or semi skip and 1 file for said chain..I'm looking at this a good learning experience and I'm too cheap to go out and buy a loop of square ground and file just to jolly around with!! Bout 28 bucks??

PM me if your interested in the above or if you have something else to offer up.
:cheers:
Rick
 
Last edited:
I have a used Sachs Dolmar 120 47mm cylinder and piston, wrist pin, clips, and jug bolts in very good condition. It will need at a set of rings to get going. No scoring in cylinder. Piston can be reused.

I am looking for a handle assembly and a chain brake band for a Dolmar 120 Super and a 16" bar for an Echo CS 451.
 
In need of .404 .063 chain.
Missed the sale at Baileys. ERRRRRRRRRRRRR!

Need at least 20' but will grab up to 100'

Any help with or were to buy would be appreciated!

Thanks guys!
 
looking for a 36" bar for a 066 or 3120!
Not much in way to trade for, but will pay!

Thanks Guys!
 
More saws up for trade or $:

Stihl 034- Nice older saw, needs nothing, but a new owner.

Stihl 038 Mag- Not the prettiest, but it runs sweet.

Stihl 025- Runs and looks good.



Some other stuff I'm looking for:

16" husky small mount bar in 3/8"
18" husky mid mount bar in 3/8" (have a 20" I will trade straight up, in nice shape and has new tip)
Mcculloch PM850 chain tensioner
Homelite Z3350 clutch drum
Stihl 036 cylinder
 
unobtainium

Hey besides The chainbreak assy for an Echo 610 EVL & a stock air filt cover for a Pioneer 1074, what other things are you guys finding that are now made from the proverbial "Unobtainium'?
 
sprockets

i have 17 different sprockets for mac,poulan,homelite,1 even says partner on the box, all are not marked& none say which saw they go to. if you need 1 & can get me the oregon # these need to go.(cleaning basement)
 
Back
Top