Swap meet...

Wesspur
Advertise with us
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
mauserman028 said:
i have a bunch of 041 parts to trade motors handles bunch more missing carbs and homelite 330 few other and two minimacs and sthil 009 been setting and a few small homelite parts i am looking for a old pioneer i can fix up or mc or a big homlite
Click to expand...

I need some 041 parts, everything above the carb. How old of a Homelite are you interested in?
 
husky 50

update i pulled the muffler and the piston and rings is bad good spark all the plastic is nice the clutch looks good nothing is missing good for parts or fix dont look to have been used much befor the piston and rings went bad
 
Still looking for a Jonsered 2159 fuel tank. Does anyone have a zama carb or muffler (carb or non-carb) for the saw? It currently has the walbro and I want to switch that out. If you can help, send me a PM.

Thanks.
 
i just bought a stihl 260 pro, saw is in great shape, but 2 things are broken, the chain brake and the kill switch shaft is broken. i would also like a 3/8 drive rim. i have cash or a 290 parts saw with lots of parts
 
I have these saws to trade or sell. I am open to offers.
The 3400 runs good, I have used it alot. Same for the Mac. The remington Super 754(if I recall the # correctly) is in good shape, I dumped mix into the carb and it fired right off thats as far as I went with it. I did not fuel the tank so the line, filter and carb could need redone. I'm pretty sure it's 88cc. The Titan is a Junior 200 that I picked up from an older gent that said he used it 3-4 years ago. This saw is in very good shape with almost all of the blue paint still on it so I'd guess it to be a low hour saw, it's just covered in dust and grease. I have not took time to do anything with it. The Skil and Homelite are just parts saws.
PM me if you're interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&amp;current=saws016.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws016.jpg" border="0" alt="Photobucket"></a>
 
Last edited:
Last edited:
mifirewoodguy said:
Looking for a 272xp chain break cover complete, a 359 top cover in good shape, a 455 rancher rear handle assy and top handle. I have lots of Husqvarna 350,353,55,365 parts. and lots of odds and ends, just ask. Jonsered 630 and 670 parts.
Click to expand...

I could use a good piston and rings for a 55 Rancher,also an ignition module. Have Homelite, Pioneer parts to trade as well as a bunch of new bars for various saws.Would trade small amounts of currency also.
 
ok i didnt get all the pics i have two 330 homeite bunch of the 041 parts are in the other barn the 041 motors was running good ok i have some mcculloch 610 parts to
 
Last edited:
my82cam said:
i just bought a stihl 260 pro, saw is in great shape, but 2 things are broken, the chain brake and the kill switch shaft is broken. i would also like a 3/8 drive rim. i have cash or a 290 parts saw with lots of parts
Click to expand...
I have a couple or more brake levers, probably if an o26 shaft is the same, I likely have 1 and the rim I think I have also. And quite a few other parts 026-260.
Also have some 028 and 031 parts.
Always can use 3/8 .050 ga stihl bars in excellant condition or new chain, 3/8 and .325 chain semi-chisel preferbly or paper w/ pics of dead presidents or ?.
 
ms460woodchuck said:
I have these saws to trade or sell. I am open to offers.
The 3400 runs good, I have used it alot. Same for the Mac. The remington Super 754(if I recall the # correctly) is in good shape, I dumped mix into the carb and it fired right off thats as far as I went with it. I did not fuel the tank so the line, filter and carb could need redone. I'm pretty sure it's 88cc. The Titan is a Junior 200 that I picked up from an older gent that said he used it 3-4 years ago. This saw is in very good shape with almost all of the blue paint still on it so I'd guess it to be a low hour saw, it's just covered in dust and grease. I have not took time to do anything with it. The Skil and Homelite are just parts saws.
PM me if you're interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&amp;current=saws016.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws016.jpg" border="0" alt="Photobucket"></a>
Click to expand...

Couple of things I'm looking for is a lightweight saw and a nice 20'' bar for a stihl 046.
 

Similar threads

V
Lots of Questions about Axe Hanging
Replies
3
Views
1K
thomasinvancouver
T
J
Hello!
Replies
9
Views
1K
jackrabbit
J
HumBurner
Sold 181/281 Parts Saws and various NEW parts
2 3
Replies
44
Views
5K
davidwyby
davidwyby
Whiskey_Bravo
What tests would you want to see on a battery powered top handle saw?
2
Replies
33
Views
3K
Dcsco
D
R
New Saw suggestions
Replies
16
Views
1K
ReddTigger
R

Latest posts

Back
Top