Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
he now calles it "Mrs"... married it?

Oh, maybe where he lives you "have to"... Uncle Thall was weilding his shotgun..

No my saws all married it they fight over her all the time
some days 372 bb some days 372 stocker or the 395
2101 thing is she is such a ho she makes them fight she
married them all loyal to none:hmm3grin2orange:
 
I want to trade these 5-point 372/385/390/575 Pro-Safety spikes for OEM 4-point spikes that came on the 385/390 and 372XPW. These are brand new.

attachment.php
 
I have a good used 1125 400 1200 flywheel here without a home, I assume you're using the universal ignition?

I am actually not sure, but I swapped coils from an old 034 and a 1998 036 and was the same. I will try to get a part number.
 
This one should work fine. It came off an 036, the early 036 with the metal model badge and plastic recoil housing.

This 036 is a 1998 model with the plastic badging. I didnt know there was different ignition setups for this series saw, I thought the only difference was the steel sleeve that Lakeside mentioned for the later 034 and all 036 flywheels?

I will have a part number in a few minutes as soon as he gets the cover off and gets it.

Thanks again Jacob...:cheers:
 
This 036 is a 1998 model with the plastic badging. I didnt know there was different ignition setups for this series saw, I thought the only difference was the steel sleeve that Lakeside mentioned for the later 034 and all 036 flywheels?

I will have a part number in a few minutes as soon as he gets the cover off and gets it.

Thanks again Jacob...:cheers:

This is the one with the steel insert. The only different ignition I know of is that funky-shaped one that came in the 036 for a while, it was listed under the 0000 400 1300 universal part # but the laminates were curved to specifically fit the shape of the 036 flywheel...

There is a 1125 400 1202 flywheel listed for Canuckian saws, I've never seen that one though.
 
This is the one with the steel insert. The only different ignition I know of is that funky-shaped one that came in the 036 for a while, it was listed under the 0000 400 1300 universal part # but the laminates were curved to specifically fit the shape of the 036 flywheel...

There is a 1125 400 1202 flywheel listed for Canuckian saws, I've never seen that one though.

I think its going to be the 1200 flywheel. Assuming it is, lets deal.
 
I have a nice Homelite VI 955 in great shape , would like to put towards a trade on a 359 Husky .
 
I have a homelite 330 and a 240 , not sure what they need or if mainly for parts, recoils are apart , I kind of aquired them from a friend that didn't want to mess with them so I don't no much about them , I think maybe one of them could be fixed but wouldn't want to say for sure .
 
064/066

Still have the 2 610 macs and the mac cat that runs
Used 064 cylinder that may clean up?
066/ms660 air filter cover that has some scratches, but is useable

Starting a new saw project looking for the following:

066 OEM piston
066/064 throttle trigger & pin (1122 180 1500) (9371 470 2600)
066 muffler with or without dual port or cover
inner spike 1122 664 0505
064 top cover name plate
stihl 20" bar in .050 or .063

Thanks JJ for making the list shorter!
 
stihl bars new and old

have a bunch of 20"-24" bars for the stihls:greenchainsaw:
 
Last edited:
- 066 Stihl sprocket - HERR brand
- Fundamentals of General Tree Work - by Gerry Beranek
- I have two chain sharpeners. Both clamp to the bar. One is a cheap version of the Granberg File-n-Joint, and the other is less sophisticated but looks more solidly built.
- Shotshell drybox - this box will hold 100 12 ga sheels, or you could take the shell holders out and make it into a toolbox.
- Chimera shooting vest. Tan in color.

I am interested in all sorts of things, but don't really need any chainsaw stuff right now.
 

Latest posts

Back
Top