Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Skil 1616 for ??? Not interested in it, figured it could be good trade fodder. Locked up tight but it does have some good parts. Let me know, like it to go in one package.

100MEDIA_IMAG1013.jpg

100MEDIA_IMAG1014.jpg

100MEDIA_IMAG1015.jpg


I seem to be building a small collection of the 16xx Skilsaw chainsaws. What would you have in mind in the way of trades?

Note: I won't be on AS much until next week. If you work out a deal with someone else, it's no big deal.
 
I have a lot of 084 gear but I'm not interested in any of the junk you listed. I'll trade for 70-90cc pro saw gear.

i have a project 066 supposedly had very very low hours on it when it had a tree drop on it, has excellent compression might need a case but im not sure i replaced the tank and recoil already. still needs still needs muffler, carb, and plastics and maybe something else i have to run out to my shop and look

i also have 660 cylinders, BB cylinders, and 2 064 cylinders one is mildly ported
 
i have a project 066 supposedly had very very low hours on it when it had a tree drop on it, has excellent compression might need a case but im not sure i replaced the tank and recoil already. still needs still needs muffler, carb, and plastics and maybe something else i have to run out to my shop and look

i also have 660 cylinders, BB cylinders, and 2 064 cylinders one is mildly ported

066/660 stuff I'm interested in for sure. I'll start rounding up the 084 stuff.
 
chainsaw for wood nude sculpture












looking for a saw, big or small i need more saws!

any reasonable offer apreciated, sculpture located in northern mi and willing to deliver to down state or to a courier.

the carving may get a poly coat, depending on the collector, i prefer oil or wax. also i can green her irises.
 
Last edited:
its a carving id like to trade for a saw so i can make more carvings faster, my lil saw cuts slow.
edit
oh iam so sorry, my pc shows the pics, eagg, ill fix the photos, sorry for messing up the thread. i will host my pics elsewhere, the shroomery is a sight for mostly druggies but there is an excellent mushroom hunting forum there where the members can identify almost any mushroom.
 
Last edited:
its a carving id like to trade for a saw so i can make more carvings faster, my lil saw cuts slow.

He means your pics ain't showing up, when we click on all those links all we see is that mushroom.
 
I'm in need of a crankcase and crank of an Stihl 041-041Super that is not busted up. I also need a carb for one. The project that has been sitting in the corner has finally made it's way to the bench. I have parts and $$ to trade.
 
What do we have here?:
View attachment 220856View attachment 220859

It's NOS, it's probably Stihl, and I THINK it might go with an 041 electronic flywheel, but that's just my guess based on sizing. Here are some numbers:

On the bottom of the plate: 2 207 031 126

On the coil/module: 2 204 211 112

Thanks for any help!

I think that may be Dolmar???
 
Looking for a Piston and cylinder for my 15 year old sons saw, He bought it last year scored bad and been using it since. Now he wants it fixed.

My saws aren't good enough for him! He likes "HIS"

Super XL Auto (A code)

Thanks
Duane

trades or tainted green parchment paper.

I'm pretty sure there are 1 or 2 somewhere in my garage,do you you still need them?
 
I think that may be Dolmar???

I dunno, could be. The only other Dolmar part I got (I just picked up three big boxes of mainly Stihl stuff) was an SEM coil that works for some Dolmar, Husky, and Stihl. Could be, but based on probability so far in the lot I acquired, probably not. At the same time, I have spent very little time with Stihl, and none with Dolmar, and this part, while I get what it is, is like nothing I've ever really seen before. Thanks for the reply.
 
What do we have here?:
View attachment 220856View attachment 220859

It's NOS, it's probably Stihl, and I THINK it might go with an 041 electronic flywheel, but that's just my guess based on sizing. Here are some numbers:

On the bottom of the plate: 2 207 031 126

On the coil/module: 2 204 211 112

Thanks for any help!

I just ran into that exact style of Bosch ignition in a Husqvarna 480....First one I've run across in those saws. They're usually SEM.
 
looking for muffler, studs, gasket, for stihl 310 . also a descent jug for a ms 200 t . have a assorted stihl , mac, mall, husky parts or green. thanks. fraser.
 
unfortunately, I need to let my 372XP/XPW go to make vehicle repairs. I got it running pretty good. The only part this needs is a new tank vent filter. It still has a low top air filter but included is the HD intake horn for the HD filter.

http://www.arboristsite.com/chainsaw/184856.htm


I will sell the powerhead for 550.00 shipped
24" Total Super bar and Oregon chain, add 100.00 these are hard to find.
16" Husky pro bar and chain, add 35.00

Feel free to PM me if your interested and we can talk!
I will try it here before I go elsewhere with it.
 
Last edited:
A short list of what I need so far...

046
Stock air filter base and cover (HD). 3/4 wrap handle.

064
Stock air filter base and cover (HD). 3/4 wrap handle, brake handle.

660
Brake handle.

PM if you have anything, as this thread takes off quick.
 

Latest posts

Back
Top