Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I need a fanwheel for one of my 041 Supers part # 1110 086 0500, Also need a couple of the wrap handle buffers. Get back with me if you can help out. Have things to trade, mostly STIHL parts THANKS

oki i'll give him a call and see what all he has i been looking at one of his 041 super saws and thing about buyuing it just to add it to my colletion.
 
oki i'll give him a call and see what all he has i been looking at one of his 041 super saws and thing about buyuing it just to add it to my colletion.

Sounds good, however sefh3 may have one that he's sending me, I will know for sure here shortly. But still interested to see if the guy you know will let any of the 041 SUPERS go. Thanks
 
I want that orange and white contraption in the bottom right corner :cheers:

HUH???

I didn't see a DARN thing there.... :confused:


Well yeah got to be nice to any folks that want to play with that kind of red and black nastyness. But then again there is gentleman on both coasts.
That saw is plumb mean to pull over. I was suprised to see the scoreing on the 2094 and they said there was no complaint of lack of power. Just didn't run smooth due to the seal and cylinder gasket. The rings are loose and smooth so it scored some time back.

GENTLEMAN??? I hope you use that term VERY loosely, :laugh:

I had a 910 j-red that was like that...low on comp...with some scoring... oiled the ring, POW! 210psi...
 
Mcculloch 310

Looking for a throttle cable for a Mcculloch 310. the one I have is cracked up on the housing. Can't seem to find just the cable. Ebay has the handle assembly for $30 but that is about all the saw is worth.
 
Remington SL-4 parts saw wanted.

Just the powerhead. Can be locked up, white death, broken fuel tank, missing carb. or ?

Need the handle, handle brace and recoil spring to repair an SL-4A with very low hrs.

Need the crankcase cover (clutch side w/bar mount), clutch cover and recoil bits for a PL-4. (The SL-4 cover will fit)

No, the handle from the PL-4 won't work on the SL-4 because of the design change of the reed.
:bang:

Have an XL-12 parts saw to trade or lots of XL-101 bits.
 
Last edited:
Looking for a throttle cable for a Mcculloch 310. the one I have is cracked up on the housing. Can't seem to find just the cable. Ebay has the handle assembly for $30 but that is about all the saw is worth.

I know someone who had one.Let check with him tonight and see if he still does? I will let you know.
 
Remington SL-4 parts saw wanted.

Just the powerhead. Can be locked up, white death, broken fuel tank, missing carb. or ?

Need the handle, handle brace and recoil spring to repair an SL-4A with very low hrs.

Need the crankcase cover (clutch side w/bar mount), clutch cover and recoil bits for a PL-4. (The SL-4 cover will fit)

No, the handle from the PL-4 won't work on the SL-4 because of the design change of the reed.
:bang:

Have an XL-12 parts saw to trade or lots of XL-101 bits.

Damn, I wish you had posted a week earlier cause I scrapped out some saws including a couple of SL-4's.
:bang:
 
This one should get some attention. I found a chain today at the scrapyard. New in the box stihl, .063g. Its 84 inches long! Kool. Anybody got a 84" bar they dont need anymore? Got some stuff to trade.:rock:
 
A friends logging crew dropped a limb on his newest saw today, so I'm looking for a MS660 tank. I have husky parts and green paper to trade.
 
Do people actually fix Homelite Super 2 saws? I have one I think complete and supposed to run if anyone is interested. Otherwise I might use it to sight in my high power.

Yeah, I have three on the bench right now. Im trying to make two runners out of them. One new plastic, one older electric ignition, one older with points. They make good little saws to ride on the four wheeler with you.

if he don't i might. got a pair under my bench patiently waiting their turn to be conjoined.

Yep. Good 4-wheeler/pickup/trunk/camp beater saws. We call 'em "bics" out here, in reference to the cheap but reliable lighters and pens...:D

Anyone have a good Walbro carb for an S25CVA? I've got some Poulan,Homlite and Pioneer stuff to trade.

I might have a spare one Dan. Gotta check my 'stash'. What sort of Poulan/Homelite stuff do you have to trade fer one?
 
Do people actually fix Homelite Super 2 saws? I have one I think complete and supposed to run if anyone is interested. Otherwise I might use it to sight in my high power.

I'll take it if it hasn't been snagged by someone else yet. You are talking about the dual trigger dinky little arborist rascal, right? If so, shoot me a PM before ya shoot it. I happened to snag one today in really nice condition that may benefit from some parts swaps.

Poge
 
stihls

What would an o38 mag , IN pretty rough shape and probably stuck , plastic faded and cracked muffler dented in , be worth ? Then there was also a 045 av there to in kinda same shape.
 
Homelite super2

Actually found a few that think it worth more than target practice. I am going out to take pics soon.

I would trade it in a heartbeat for 18" 3/8 .050 chains, or an unlimited coil for my 346xp.
 
Yep. Good 4-wheeler/pickup/trunk/camp beater saws. We call 'em "bics" out here, in reference to the cheap but reliable lighters and pens...:D



I might have a spare one Dan. Gotta check my 'stash'. What sort of Poulan/Homelite stuff do you have to trade fer one?

How about a NOS carb for XL12-Super XL? Or tell me what else you need. :msp_thumbup:
 
How about a NOS carb for XL12-Super XL? Or tell me what else you need. :msp_thumbup:

You have my attention Dan! Let me get back to you after I verify that I have a good carb for you. It'll probably need a kit, but is otherwise in great shape. I also need to figure out what I need....:D
 
Don't think so, it's this saw.
roper37001.jpg

You need something for that saw?

I might be willing to trade mine for something... it's in good shape except for the p/c, which is scored pretty bad.
 

Latest posts

Back
Top