Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I *think* I am in the market for a Husqvarna 141 clutch cover and clutch spring.
Got this beauty to fix for my brother in law...I'm not sure he should ever run a chainsaw again.
Not the first to fail in that manner. The BIL may be a tool or whatever, but hard to say abuse in that case.
Besides, its a 141.
Wagnerwerks
The underdog..
Its just a standard issue poulan clutch right? I don't have the cover, but should have 15 or so clutches if its the same as a poulan clutch....
I believe I have the cover...
Uncle Rico
ArboristSite Operative
Here are the details:
36" Oregon Power Match Bar D023
363ZZZD023 - I believe the mount fits older Homelites and Jonsereds.
I've posted pics in the swap meet thread before, can probably search for them.
FYI.The drum and rim will require another trade!:smile2:
Eccentric
Mister Wizard
Not a problem. Whatcha need fer it?
redunshee
Addicted to ArboristSite
HUsky 272xp
Need parts for my basket case. Bearings frozen and case in poor shape. Looking for a case, clutchcover/chainbrake assembly, handle bar, etc.
Bob
Need parts for my basket case. Bearings frozen and case in poor shape. Looking for a case, clutchcover/chainbrake assembly, handle bar, etc.
Bob
64countryboy
New Member
Stihl MS360
Anyone have a good used p/c and crank for a stihl ms360? A friend gave me the saw and i thought i might try to get it up and running. I don't want to put a lot of money into it so i thought i would check on here and see if someone might have a few good parts laying around.
Anyone have a good used p/c and crank for a stihl ms360? A friend gave me the saw and i thought i might try to get it up and running. I don't want to put a lot of money into it so i thought i would check on here and see if someone might have a few good parts laying around.
Warped5
WingNut
Turn off the alarm ... spike on the way.
Have you got a useable 20" bar in k091 mount and 3/8" pitch?
Last edited:
shawn022
ArboristSite Guru
Really need a 056 ignition setup. Saw belongs to my neighbor and he wants to hear it run again. Needing either bosch electronic coil and flywheel or SEM set. Would take just a SEM flywheel too.
I know what I'm asking for so let me know what you need. I just need to get this thing off my bench.
I know what I'm asking for so let me know what you need. I just need to get this thing off my bench.
Eccentric
Mister Wizard
I'm not familiar with that mount. What saw is it for?
Got your PM. Go ahead and verify the DL count that you need.
I'd be wholly interested in that bar if it's the 10mm mount for older Jonsereds.
Kevin
If anyone can spare a Jonsered 2083 or Poulan 505 cylinder, even if damaged, I can use it. I got lots to trade or just money.
Mastermind
Work Saw Specialist
I ain't got what you're seeking but I'd still take the money you are offering.
Well, we do live in a capitalist society...
umpkin2:
Well, we do live in a capitalist society...
For the time being.....
machinisttx
Addicted to ArboristSite
Well, we do live in a capitalist society...
Depends on what part of society you're talking about. True capitalists are an endangered species.
