Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jordan3605

Jordan3605

ArboristSite Operative
Joined
Jan 23, 2011
Messages
486
Location
Maine
Just got done with my 066 Big Bore NWP rebuild. Runs great!!!!

Now looking rebuild my Husqvarna 385
needs:
Piston
Cylinder
bearings
seals
brake handle
clutch cover
any other parts in good condition....

looking for suggestions on piston/cylinder kits
at baileys they are about $270
checking for any other options
 
nmurph

nmurph

ArboristSite.com Sponsor
Joined
Nov 26, 2007
Messages
16,162
Location
Somewhere in the space-time continuum
I'm on the hunt for the necessary parts to convert a 61 to a 272.

Looking for-

Piston/Cylinder
intake
carb

If you know of other stuff I will need, please let me know. I spent a few minutes scanning some old post, but there were varying opinions of exactly what was needed and what would work.

Thanks,
Neal


Someone has to have these parts.
 
nmurph

nmurph

ArboristSite.com Sponsor
Joined
Nov 26, 2007
Messages
16,162
Location
Somewhere in the space-time continuum
Your Pushy... :poke:






You've got mail!

(tryin' to help....)

:cheers:

Oh, it's you again. Don't you need to go play in the middle of the Interstate? :msp_scared:

Nothing there yet.

I do, but mine are all attached to a running saw...:pumpkin:

Well, you could just send the whole saw and I will pay for the parts.
 
SawGarage

SawGarage

Addicted to ArboristSite
Joined
Mar 17, 2010
Messages
3,062
Location
Somewhere in Time
I do, but mine are all attached to a running saw...:pumpkin:

There's a 61-272 carb in the box that's going back to you. :msp_razz: We need to get together on the phone again when you have a second. Life has been hectic lately with trying to finish this deck, and the rain. :dizzy:

I'll give you a shout in the am..

:cheers:

J
 
SawGarage

SawGarage

Addicted to ArboristSite
Joined
Mar 17, 2010
Messages
3,062
Location
Somewhere in Time
Oh, it's you again. Don't you need to go play in the middle of the Interstate? :msp_scared:

Nothing there yet.

I would...if they payed me RATE-time for the work.. ;)

Not really funny seeing how a guy near the big city was just found this AM hit-and-run ... found dead. NO IDEA who the purp is :(

What a shame :msp_sad:
 
Jacob J.
Joined
Aug 26, 2001
Messages
17,587
Location
Oregon
There's a 61-272 carb in the box that's going back to you. :msp_razz: We need to get together on the phone again when you have a second. Life has been hectic lately with trying to finish this deck, and the rain. :dizzy:

I'll give you a shout in the am..

:cheers:

J

I got a lot of those carbs so it would be just as well if you want to keep it. If you can't use it, then there might be another member that can...

I still have some other parts here with your name on them.
 
mdavlee

mdavlee

Tree Freak
Joined
Apr 18, 2008
Messages
18,144
Location
tn
Just got done with my 066 Big Bore NWP rebuild. Runs great!!!!

Now looking rebuild my Husqvarna 385
needs:
Piston
Cylinder
bearings
seals
brake handle
clutch cover
any other parts in good condition....

looking for suggestions on piston/cylinder kits
at baileys they are about $270
checking for any other options

I think randy Watson has a cylinder kit for the 385 now.

http://www.weedeaterman.com/product_p/h30385.htm
 
Outlaw5.0

Outlaw5.0

ArboristSite Guru
Joined
Aug 20, 2007
Messages
922
Location
Michigan
Looking for a MS460 big bore Gen 1 piston. I want to mill the chamber more and my current piston has a .030 pop up and I'm out of room before free porting.
 
SawGarage

SawGarage

Addicted to ArboristSite
Joined
Mar 17, 2010
Messages
3,062
Location
Somewhere in Time
I do, but mine are all attached to a running saw...:pumpkin:

I got a lot of those carbs....

Why does that sound contradictory?? :dizzy:


I still have some other parts here with your name on them.

Lets get through this or(deal) with the 562 before offering/promising other things that may lead into more dealings. I want to be sure we are both on the same page with what ails us... :msp_wink: :cheers:



You're not done with that deck yet?!? Lol.

J/k

Yeah yeah yeah... lol!!

Almost done.... rails and balusters are going up tomorrow :)

J
 
hemiyota

hemiyota

ArboristSite Operative
Joined
May 4, 2011
Messages
370
Location
Maryland
I need a bar cover for this saw. It's plastic, and the part number is 5015349-01. I have some Husky 350 parts to trade or $$$.

attachment.php


attachment.php


attachment.php

bump
 

Latest posts

Top