Any interest? Might have to be local, I don't know how I would ship it. PM if interested.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I am needing plastics for an MS440 (good condition). I am limited on trading stock (10-10, dolmar 123, poulan 25da), but have some cash too.
I'll check on the plastics for ya.
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,167
Does anyone have a starter assembly for a 6401???? Government vouchers available for trade (maybe some 346/353 parts also).
Thanks Ed.
SugCutter
ArboristSite Member
Looking for a very nice 16" x 058 K095 Windsor Speed Tip Bar 16CJL58STA
PM with details.
Thanks,
Sug
PM with details.
Thanks,
Sug
Bar trade
Bars for trade in the classifieds..........
http://www.arboristsite.com/tradin-post/243029.htm
Pm any intrests
Bars for trade in the classifieds..........
http://www.arboristsite.com/tradin-post/243029.htm
Pm any intrests
ts 760 interchange any, I quite a few parts from 1.
I have that too. I won't be able to ship it for a couple days... check her out real good and let me know what you need.
cat-face timber
Knot Bumper
Trade bearings 372 for 288
I have two NIB bearings for a Husky 372 (not sure what else they will work in).
I want to trade them for two NIB Bearings that will work in my Husky 288 Build.
They are
NSK
6202ZZC3
Here are some pics.
I have two NIB bearings for a Husky 372 (not sure what else they will work in).
I want to trade them for two NIB Bearings that will work in my Husky 288 Build.
They are
NSK
6202ZZC3
Here are some pics.
Jimmy in NC
Addicted to ArboristSite
I have two NIB bearings for a Husky 372 (not sure what else they will work in).
I want to trade them for two NIB Bearings that will work in my Husky 288 Build.
They are
NSK
6202ZZC3
Here are some pics.
You need 6203 c3 bearings for your 288.
Jimmy....mobile.
Carb, kill switch and wire, the arm with the shield and the arbor, all of the bottom buffers that hold it off the concrete when running, and a few other small bits too.
View attachment 311224View attachment 311225View attachment 311226View attachment 311227View attachment 311229
Here's most what I have in ts 760 to trade off, no good cylinder, a couple 075 parts are in the mix. I have a carb.
Still didn't get if these interchange with ts 510 . I know little to nothing about them .
3/8 .050 New semi chisel non safety chain, 036 part saws and larger models is what I could use.
Here's most what I have in ts 760 to trade off, no good cylinder, a couple 075 parts are in the mix. I have a carb.
Still didn't get if these interchange with ts 510 . I know little to nothing about them .
3/8 .050 New semi chisel non safety chain, 036 part saws and larger models is what I could use.
Jimmy in NC
Addicted to ArboristSite
I have two NIB bearings for a Husky 372 (not sure what else they will work in).
I want to trade them for two NIB Bearings that will work in my Husky 288 Build.
They are
NSK
6202ZZC3
Here are some pics.
Those bearings will fit most Husky saws in the 266,268,272,365,372,55,51,etc. Probably most common bottom bearings. Also fits some Echo saws too if I'm not mistaken.
Jimmy....mobile.
Just wondering,,,
Anyone got a new 044 12mm piston kit that wants to trade for a brand new Meteor 044 10mm piston kit?
Anyone got a new 044 12mm piston kit that wants to trade for a brand new Meteor 044 10mm piston kit?
Okay, ill take the arm/shield/wheel. The white aluminum piece on the wrap handle, that has a buffer on the bottom. and the mount that holds the handle on the FW side of the case. Hows the carb look? Going to need a kit??
Dont have any of those trades. but im sure we can add this to the already existing list of parts i need from you. lol
Thanks!
I'll aim to get it all together this week and send ya some pics to make sure I have it right, pm me your email addy if u haven't already, for the pics.
DeckSetter
ArboristSite Operative
SawGarage, if you read this, delete some private messages and send me one.
Jordan
Jordan
