Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Stihl Stuff: 050 051 075 076

Here's a list if anyone is interested...

I believe all of the parts are New Stihl OEM:

1111 141 0502 - Filter Cover
1111 791 1906 - Front handle bracket?
1111 791 1907 - Front Handle bracket?
1111 120 1602 - 3 each - Air Filters
1111 036 9115 - 6 Each Rewind/recoil Washers
1111 182 1001 - 2 Each Triggers ("Stihl 3" is stamped below the part number)
1111 ??? ???? - Looks like a choke lever

Hello PA Plumber,

first of all , I wish you a good New Year.
My name is Markus Anderl from Germany. I am searching for the Stihl part 1111 791 1907. So I have found your offer.
I know your offer is a few years old. Is your Front Handle bracket 1111 791 1907 still available?
I want to mount a full wrap handle bar to my Stihl 075AV. Only this part is missing.

Best Regards
Markus Anderl
 
I looking for a husky 268/268xp/272xp cylinder, can be open or closed port . Also need 268/272 top cover. I also could use a husky 371/372-jonsered 2070/71 cylinder and a 2070/71 and top and air filter covers. I have stihl and husky parts and or cash. Some things up for trade are a mint 084 jug, 066/660 and ms460 cylinders. Some ms250 270/280 290 parts plus a bunch of others, too much too list. thanks
 
Looking for a couple Stihl 046/460 cranks. Trying to build up two saws and all 4 of the cranks I have spun inside the inner race of the PTO bearing. The crank just falls into the new bearing with no resistance......no good.

Parts or $$$
 
I believe I have a 61 crankcase if that would work?
epicklein22 - here is a picture of 268 case next to 266 case. See that extra tapped hole on the top case near where carb will hit cylinder? Does the 61 case have that hole? I even considered tapping a hole in the 266 case but no metal in that exact location.
518d3c6f181b38b6b2048e2866fec234.jpg


Brian
 
Just got word from my Sachs Dolmar Guru...that my 116si is not scored or burnt up...just a couple of scratches...he said to find him some seals, rings, and gaskets...and he'll have it up & running.:rolleyes:
Where can I find the appropriate seals, rings, gaskets?...Not good at finding internal stuff.
This is getting real old...Geez!!!:dizzy:
 
epicklein22 - here is a picture of 268 case next to 266 case. See that extra tapped hole on the top case near where carb will hit cylinder? Does the 61 case have that hole? I even considered tapping a hole in the 266 case but no metal in that exact location.
518d3c6f181b38b6b2048e2866fec234.jpg


Brian

Brian,

I just saw this post, will report back tomorrow in the morning with my findings.
 
That makes sense because I think the 272 is the next evolution of the 268 based on my reading on AS. The air filter got much bigger and uses this two extra holes for a mounting bracket.

Brian
 
looking for a makita 6401 recoil spring or complete cover, av mounts, a full wrap handle or even a complete parts saw have some still parts saws for trading(025, 028, 034) possibly other saw parts ill check in the am or cash
 
Back
Top