What's On Your Bench? 2/15/13

[stihl sawing]

Says video not found for me?

I've watched your vids before........strange?

You probably don't wanna see it, There is a fast saw in it.:msp_tongue:

 

[bucknfeller]

Try this one.



It's working for me.

Worked for me. That's freaking awesome man

 

[lmbrman]

ended up with twins-

 

[Walt41]

Hey SS, just put a Honda clone from HF on that genset for $89 and be done with it, most times those small Hondas scatter more than a simple rod when they go clunk, trust me I know, had same issue with a Claussen aerator last year.

 

[Trx250r180]

this is my favorite one so far ,have to look into the 661 when it comes out though View attachment 279500

 

[Mastermind]

this is my favorite one so far ,have to look into the 661 when it comes out though View attachment 279500

Everyone that owns one of these says the same.......and then you have Brad's assessment. I don't get it.

 

[thomas1]

Everyone that owns one of these says the same.......and then you have Brad's assessment. I don't get it.

Is that the same guy that would rather get 5% out of a muffler mod than 40% out of a properly done port job?

 

[whitedogone]

Holly ####, Brad looks nasty in a swim suit.

 

[Jacob J.]

Everyone that owns one of these says the same.......and then you have Brad's assessment. I don't get it.

I was happy with my 046, until the internet told me I wasn't.

 

[mweba]

I was happy with my 046, until the internet told me I wasn't.

SXLA Down the rabbit hole I went...

 

[Eccentric]

i'm still working on saws owned by people that think i'm a subdivision of unicef..
it's like a kicked there dog when i say it's going to be $300 because they loaned there saw out..

Dave have I ever told you that you asked for that with your CL ad?otstir:

Gotta get this one boxed up and sent out.

I knew you weren't man enough for that saw Tom. Did JJ send you one of them neat-o worx grabber chainsaw-on-a-stick thingee's in trade for it? Seen the commercials. Thems things is badass. They're the chainsaw................................................reinvented.

 

[Jacob J.]

I knew you weren't man enough for that saw Tom. Did JJ send you one of them neat-o worx grabber chainsaw-on-a-stick thingee's in trade for it? Seen the commercials. Thems things is badass. They're the chainsaw................................................reinvented.

I offered to send him a starter rope and handle in exchange for a shrunken head of one of the many tourists he's captured on his property over the years, but he didn't want to risk sending it USPS.

 

[Trx250r180]

Dave have I ever told you that you asked for that with your CL ad?otstir:



I knew you weren't man enough for that saw Tom. Did JJ send you one of them neat-o worx grabber chainsaw-on-a-stick thingee's in trade for it? Seen the commercials. Thems things is badass. They're the chainsaw................................................reinvented.

i think that saw is goint to a place where it will be appreciated ............

 

[Dennis Cahoon]

Holly ####, Brad looks nasty in a swim suit.

......and his "package".......can we say mini-mac......Hahahahahaha!

 

[Mike-M]

Is it a Super 990? I'd like to find a replacement for my old one.

Nah nothing cool. just my little mighty mite

 

[RiverRat2]

A Stihl TS420 Cut whatever you want to saw,, Its so ugly I didnt take a picture!!!

Crankcase bearing let go, was missing two balls??? Not in the muffler?? Split the cases cleaned up the mess, All it did was trash the piston. Cylinder was actually still usable but the owner went with new P/C, Installed new seals, cleaned/polished the crank, installed new bearings, assembled the bottom end, centered rotating assembly, built the topend installed flywheel and intake boot assembly & new decomp & sparkplug, took one look @ the tank assembly/carb and all the other crap that bolts on to one of those things??? Scatched my head and told the other guy who tore it down he could finish it!!! I stuffed rags in all the openings and took off I got 40 lbs of Crawfish and all the trimmings to boil see Ya!!!!!!

 

[Eccentric]

i think that saw is goint to a place where it will be appreciated ............

Yep. Those big 'ol magnesium monsters are sure appreciated out here on the west coast.

 

[Mastermind]

i think that saw is goint to a place where it will be appreciated ............

It must be coming to Tennessee then.

 

[Trx250r180]

i heard the 990 doesnt balance too well anyways ,so they put a handle on the end of the bar for a second person to lift on to keep the operator from falling forward,was a bad idea though ,the helper would be covered in bar oil at the end of a cut ..........

 

[Mr. Bow Saw]

Started restoring this Mall 12A.