Big_Wood
westcoast dweller
is that the 338 in redmax colors? :msp_wink:
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
is that the 338 in redmax colors? :msp_wink:
MechanicMatt
Cut Split Stack Burn
Are there any fans of Shindaiwa saws out there that want to trade away a orange saw??? I have a Shiny that Im never gonna work on. Needs a fuel line if I remember right. If interested Ill check the model number, not a big saw, Little fella. Also got some 031 and 015 bits to throw out there if anybody is looking.
Its a 450.
Last edited:
i believe it to be a redmax in redmax colors lol
Big_Wood
westcoast dweller
what's the price on that one? i'm trying to keep it within trading grounds. I've been getting into climbing a bit. dealt with a pine last week but got a huge hemlock on the same property to deal with. my buddy doesn't seem in to big of a hurry to take it down but it's leaning right over his house. 2' sections is the only way to get'er down. all I can say is I sure as hell wouldn't be sleeping under that tree
I've got a 335xpt I would be willing to trade off....I've spent a ton of time and money on it and can get it to idle consistently....It vac tests 100%, tried 2 carbs, vented cap, etc. It doesn't run horrible, but just not quite right in my opinion. Gutsy when you're cutting with it though.
I've got a 335 with the same problem and it's the carburetor. You have to find a carburetor that wasn't originally for the 335 and swap all the stuff over. I believe there's several WT carbs that can be made to work.
rebuilt a 335XP
it was the weak-link intake manifold with a tiny puncture/crack.
as usual - just saying
that's the case I had.
but yea, you can never know what it is until you check that manifold to eliminate this option beyond any doubt.
Jo.
====================
EDIT:
it's an "XPT" not "XP"
it was the weak-link intake manifold with a tiny puncture/crack.
as usual - just saying
that's the case I had.
but yea, you can never know what it is until you check that manifold to eliminate this option beyond any doubt.
Jo.
====================
EDIT:
it's an "XPT" not "XP"
Last edited:
it was the weak-link intake manifold with a tiny puncture/crack.
as usual - just saying
that's the case I had.
but yea, you can never know what it is until you check that manifold to eliminate this option beyond any doubt.
Jo.
====================
EDIT:
it's an "XPT" not "XP"
Yep, I definitely don't find them to be a "regular wear item" like an intake boot of fuel line, but I did just find a cracked one a 2172 I just acquired. I guess it just doesn't pay to tighten some things with a 1/2" impact...
Got some new bars I don't need.
If you look at the photos, you can see that I marked the sleeves that they come in with numbers. Here's what they are:
View attachment 295751View attachment 295754View attachment 295755View attachment 295756[View attachment 295758ATTACH=CONFIG]295757[/ATTACH]
2. GB Pro .375 58 gauge 18" Replaceable Greaseable Sprocket Nose # 26418 (Fits many models, see the second of the two photos of the sleeves)
4. Total .375 50 gauge 16" Greaseable Sprocket Nose #415WL4 (Says "Husqvarna" on the sleeve)
5. Total .375 58 gauge 16" Greaseable Sprocket Nose #481WL4 (Says "Jonsered" on the sleeve)
6. Total .375 50 gauge 16" Greaseable Sprocket Nose #256ML3 (Says "Oly/Stihl" on the sleeve)
7. Total .375 50 gauge 16" Greaseable Sprocket Nose #677ML3 (Says "Echo/Poulan" on the sleeve)
8. Total .375 50 gauge 16" Greaseable Sprocket Nose #321WL4 (Says "Homelite" on the sleeve)
9. Total .325 63 gauge 16" Replaceable Greaseable Sprocket Nose #206SR2 (Says "Stihl" on the sleeve)
10. Total .375 50 gauge 16" Greaseable Sprocket Nose #200WL4 (Says "Stihl" on the sleeve)
11. Total .375 50 gauge 14" Greaseable Sprocket Nose #452ML3 (Says "Frontier" on the sleeve)
12. Total .25 50 gauge 14" Greaseable Sprocket Nose #003ML1 (Says "Echo/Poulan" on the sleeve)
13. Total .375 50 gauge 14" Greaseable Sprocket Nose #003ML3 (Says "Echo/Poulan" on the sleeve)
14. Total .375 50 gauge 12" Greaseable Sprocket Nose #451ML3 (Says "Frontier" on the sleeve)
I'm looking for McCulloch 7-10a/ Pro Mac 700 parts/saws. Partner p100/McCulloch Pro Mac 1000 parts/saws as well. And really anything. Projects, parts saws, parts, etc.
Email me at bplust AT gmail.com or PM me if you're interested. I'll edit my listing as bars are gone.
Bryan
If you look at the photos, you can see that I marked the sleeves that they come in with numbers. Here's what they are:
View attachment 295751View attachment 295754View attachment 295755View attachment 295756[View attachment 295758ATTACH=CONFIG]295757[/ATTACH]
2. GB Pro .375 58 gauge 18" Replaceable Greaseable Sprocket Nose # 26418 (Fits many models, see the second of the two photos of the sleeves)
4. Total .375 50 gauge 16" Greaseable Sprocket Nose #415WL4 (Says "Husqvarna" on the sleeve)
5. Total .375 58 gauge 16" Greaseable Sprocket Nose #481WL4 (Says "Jonsered" on the sleeve)
6. Total .375 50 gauge 16" Greaseable Sprocket Nose #256ML3 (Says "Oly/Stihl" on the sleeve)
7. Total .375 50 gauge 16" Greaseable Sprocket Nose #677ML3 (Says "Echo/Poulan" on the sleeve)
8. Total .375 50 gauge 16" Greaseable Sprocket Nose #321WL4 (Says "Homelite" on the sleeve)
9. Total .325 63 gauge 16" Replaceable Greaseable Sprocket Nose #206SR2 (Says "Stihl" on the sleeve)
10. Total .375 50 gauge 16" Greaseable Sprocket Nose #200WL4 (Says "Stihl" on the sleeve)
11. Total .375 50 gauge 14" Greaseable Sprocket Nose #452ML3 (Says "Frontier" on the sleeve)
12. Total .25 50 gauge 14" Greaseable Sprocket Nose #003ML1 (Says "Echo/Poulan" on the sleeve)
13. Total .375 50 gauge 14" Greaseable Sprocket Nose #003ML3 (Says "Echo/Poulan" on the sleeve)
14. Total .375 50 gauge 12" Greaseable Sprocket Nose #451ML3 (Says "Frontier" on the sleeve)
I'm looking for McCulloch 7-10a/ Pro Mac 700 parts/saws. Partner p100/McCulloch Pro Mac 1000 parts/saws as well. And really anything. Projects, parts saws, parts, etc.
Email me at bplust AT gmail.com or PM me if you're interested. I'll edit my listing as bars are gone.
Bryan
Last edited:
I need an air filter cover for a MS310, it is the flat one.........got parts and stuff to trade.....
Big_Wood
westcoast dweller
Does anyone have a 026 half wrap or some 2150/350 husky/Jred hardware? Need the handle hardware... bottom short screws, long upper screws and the spring-2 screws. and the plastic pieces that mate the spring to the handle.
I have parts and $$$ to trade... PM me whatcha got!
I have parts and $$$ to trade... PM me whatcha got!
Sounds like 2150 hardware is taken care of... Maybe?
Still need 026 Stihl 1/2 wrap handle.
cat-face timber
Knot Bumper
On the huunt for a Husky 288 (or in the same family)
Parts saw.
What do you want for it?
thanks
Parts saw.
What do you want for it?
thanks
Wagnerwerks
The underdog..
Anyone have a good 365/372 crank laying around? Dozer Dan is gonna port me a saw, but I think I better replace my crank. Its a bit blued. Please let me know what you need for it. I have lots to trade or a small amount of cash and even some stamps.
Wagnerwerks
The underdog..
I might have some more 350 hardware if you end up needing some.
booger1286
ArboristSite Operative
Still looking for 660 crankcase and wj69 carb.
Is the big end rod bearing crispy? I've seen the rod get the bluish color before but the rod bearing looked fined and ran for a number of years after.
Gents,
I'm in need of a heat shroud/shield for a 106cc Stihl Contra.
please PM me if you have one to sell.
Phil.
I'm in need of a heat shroud/shield for a 106cc Stihl Contra.
please PM me if you have one to sell.
Phil.
Wagnerwerks
The underdog..
Yeah... Its doesn't feel bad and rolls smooth, but the rollers are blued. My intent was to run it, but when Dan made me a deal I could not refuse I started to question it. I'd hate to finally have a ported 372 and have the rod bearing fly out. Were the bearings blued on the ones you ran?
Last edited:
Similar threads
