Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yes I wll trade for the D176 mount or the D096 as well. Either will work on my old green junks. The D009 will also. You have a hard time finding 24" and over K095 mount bars. (silly:msp_tongue:)

Ah. You had me confused Mark. Not that hard to accomplish. Are all these bar options for the same saw of yours.........or more than one? A K095 bar is quite a bit different than a D096 or D009. Baileys catalogs 24" and 28" K095 Oregon Power Match Plus bars by the way. 24" in .050G and .058G, and 28" in .050G only....



Ah just what I thought, and like I said that make it more like a D096 mount!

Yep. My bar has a 5/16" slot however. Still haven't pulled it off the saw to check the numbers.....
 
Last edited:
I am looking for the missing bits for the recoil starter on a Wards Powr-Kraft.

View attachment 204540
attachment.php


Have lots of small Homie XL-101 bits and the ever popular Walmart Poulan 2150 odds and ends to trade. Coin of the relm if push comes to shove.

Bump T.T.T.. Try number three.

Let's be checkin' them old lawnmowers for starter parts fellas.
 
Need a clutch cover\bar clamp for my Poulan 7700, I believe one from a 4400-8500 will work. I am looking for the plain cover vs a chain brake because I will be running a bow on this saw.

Johnnie, I only have one extra and I dont want to turn it loose. :laugh:

There are quite a few listed on ebay right now under chainsaw parts, but not real cheap. Just so you know that not all 4400's had 3/8s bar studs but that should be no problem if you find a cover with 5/16" holes. You can just drill them out to 3/8's.
 

here's a few pictures of the one i got.i just hd this saw gave to me a few days ago.and i decided to put it in some wood to tune it up and rejust everything on it.untill it caught the wood on fire.

homelitemufflerpictures004.jpg

homelitemufflerpictures002.jpg

homelitemufflerpictures001.jpg


bump still needing a muffler got green slips and a few parts to trade
 
044 Stihl parts

I would like to find a parts saw or at least a tank handle and the aluminum piece with the air filter stud on it. I would also like to find some decent covers, mine are in rough shape.

Thanks,
Bill
 
Last edited:
I would like to find a parts saw or at least a tank handle and the aluminum piece with the air filter stud on it. I would also like to find some decent covers, mine are in rough shape.

Thanks,
Bill

I have a 440 tank, the aluminum piece, and a filter base, but I cant let loose until I find an 046 tank to replace it. You dont have an 046 tank, do you? :redface:
 
A while back I sent mastermind (I think) a freebie 2.3 craftsman/poulan. Someone else pm'd me about it a little too late but I told them I would pm them if I got any more, but I can't remember who it was.

Just picked up a poulan super deluxe 25 and a wizard 316. Whoever it was pm me.
 
I'm seeking a few 026 parts:

Air Filter and Cover
Clutch drum
Muffler Cover

I've got lots of junk.....errr, I mean parts to trade, and I trade labor, cash, or stuff. :)
 
Needing a decent looking top cover for a husky 61. Old style, two coils. I also evidently need a newer style air filter adapter, since mine is the single bolt style.
stuff or pesos to trade.
 
Coyotes everywhere would be lining up to buy it!

I did send a dead mouse to an AS member recently. We should be hearing from him any day now.

:jester:

That's been going around lately. Got a surprise on the porch the other day. Thinking it's time for me to spread some of that around again.
 

Latest posts

Back
Top