Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Pioneer 610- was a runner- Like new chain
Mac D-36- Did run, has manual thumb pumper on the front
Dayton 2z461- did run, cracked cast inside muffler half- no bar
Montgomery Ward 2.8- Isnt locked up
Mac 1-43 and a 1-41
Mac 250- early yellow top. Missing a few parts
Homelite 330 and 360 parts.

Up for swap. Gotta get the shop cleaned up
 
Not after the trouble I went through trying to find a 3/8s sprocket for this thing.

Seems the only .404 sprocket that I can find for this Poulan 6000/Dolmar 152 is a .404x8 that the saw dont really like that well.

If I could find a .404x7 it might pull it better...

Thought I would ask.....I could make you a loop of .404, but it would be full comp, so that would be extra bad with a long bar and a fast sprocket.
 
Let me see what I got left, I might have one I can spare. You want one thats not broken right? ;)


I just fitted a 38" bar to my Poulan 6000 and need a 3/8's .063 guage 134DL chain. Prefer skip chisel.

Anyone got enough .063 to make up 134DL?

I have some .050 72LGX full comp to trade, I also have those .058 guage 28" bars and I just found a 20" .058 Pioneer branded hardnose bar as well. I also got some 16" Homelite bars.

EDIT!!

Chain should be 124DL not 134.

Mark, I'll check, I think I have around 90 to 100 dl of Carlton skip, maybe can find another piece.
 
OK I'll play mr boring on-topic for a sec too.

Still need a 3/4 wrap or full wrap handlebar for an 066/MS660. It's my end of a local saw trade deal with a friend. May be willing to trade a nice runner McCulloch 10-10A for it, or Homelite/McCulloch parts and $$$ for it, or.....

I got one of Nate/Metals406/DCS handles for a 066/660 left PM me.


I need a chain brake handle for a 064.
 
Last edited:
I'm digging.

So far I've found, lots of mini spline rims, a new aftermarket air filter, and I think I have a decent used clutch drum round here somewhere...
Edit: Found the clutch drum: In good shape. Also found some other stuff, like clutch needle cage and e clip.
Also, I have an 024 filter cover, but it looks to be a little shorter than its 026 counterpart.

Looking for, air filter for a Poulan 3400 countervibe, and a green clutchside cover to match the rest of the saw. The one I have is Yeller.

Here's a pic of the saw;

attachment.php

If you are still looking I will check out the one I have at home. Should have all those parts attached.

Shea
 
Pioneer 610- was a runner- Like new chain
Mac D-36- Did run, has manual thumb pumper on the front
Dayton 2z461- did run, cracked cast inside muffler half- no bar
Montgomery Ward 2.8- Isnt locked up
Mac 1-43 and a 1-41
Mac 250- early yellow top. Missing a few parts
Homelite 330 and 360 parts.

Up for swap. Gotta get the shop cleaned up

what kind of parts you got for that homie 330? lookin for a clutch assembly, sprocket, cover, inner/outer guide plates, bar nuts - basically everything on the clutch side
http://www.arboristsite.com/stickies/101147-post3232726.htm#post3232726
 
Last edited:

Latest posts

Back
Top