Swap meet...

Advertise with us
Wesspur
Treestuff
Shop deals on ebay
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
homelite028 said:
I have a bunch of parts and whole saws. I have bunch of 041 stihl parts whole motors other parts. 10-10 mcculloch parts and 610 mc parts some 028 stihl parts i have a promac 55 good motor few other parts .....I still have the pioneer 1200a runs great 18 inch bar and the dynamark 36cc chainsaw bran fresh good spark and compression
I am looking for xl-700 or bigger homelite dont have to be running.
Click to expand...

Would a Homelite c-72 complete (minus b&c) be of interest? I need good bar, preferably with chain but not deal killer without, 28"-36" for a Poulan 5400/5200/8500.
 
395XPWOODCHUCK said:
Looking for a good 24'' bar for a poulan 4000, I have a little to trade and paypal. PM me if you can help me out.
Click to expand...


Also looking for a muffler cover to poulan 3600. Interested in buying some poulan saw's too if ya got one to get rid of or part's that I'm looking for shoot me a PM.
 
395XPWOODCHUCK said:
Also looking for a muffler cover to poulan 3600. Interested in buying some poulan saw's too if ya got one to get rid of or part's that I'm looking for shoot me a PM.
Click to expand...

Picked up a Poulan 3400 this week, it runs but wont hold a decent idle. I only put around ten mintues time into it so with some tinkering I bet it will run.

Its complete minus the bar and chain, but all the plastic covers are there. I'm not sure what there worth is, but I am looking for 064 parts, ( handle, brake handle, HD filter and a set of dogs ), so maybe you have some parts.

Jason.
 
Jason M said:
Picked up a Poulan 3400 this week, it runs but wont hold a decent idle. I only put around ten mintues time into it so with some tinkering I bet it will run.

Its complete minus the bar and chain, but all the plastic covers are there. I'm not sure what there worth is, but I am looking for 064 parts, ( handle, brake handle, HD filter and a set of dogs ), so maybe you have some parts.

Jason.
Click to expand...

No stihl parts but am interested in the saw. PM me if ya got a cash price in mind for the 3400.
 
395XPWOODCHUCK said:
No stihl parts but am interested in the saw. PM me if ya got a cash price in mind for the 3400.
Click to expand...

Ok, I will post a pic or two sometime today early tommorow.

Not sure there worth, do you have a ballpark price of what a saw in that shape would be worth? We can take it to Pm's if you want, or just post here.

Jason.
 
 
Last edited:
chainsaw parts pics

I got some pics up of some the parts that i have theres a bunch I have more i didnt get pics of
give me a call 606-878-6285 or pm thanks ben i have some more 028 stihl parts
 
Last edited:
1200a pioneer

I still have the 1200a pioneer runs and starts good nothing wrong with it.. i have a few extra parts to go with it. the piston and cylinder looks good holds good compression
 
Looking for a front handle for a 046 stihl. Also a clutch cover too for the same.
Thanks
Bob
 
Warped5 said:
Thanks Ed .. PM scent.



Yep! I saw your earlier post ... PM scent to you too ... :hmm3grin2orange:
Click to expand...

Ted your Skil branded Poulan is a Micro series saw...........NOT a 25/XXV. Some Micros had "XXV" or "25" in their model names ("Micro XXV" and "Super 25 Micro" for example). Other than the similar names, the spark plugs, the bars/chains, and a duckbill valve or two............those two saw series (Micro and XXV/25) share NOTHING in common. The XXV/25 AF cover won't work on your Micro series saw, even though the parts look similar. The Micro saws have two screws securing the AF cover (one on each side) while the XXV/25 saws have a single centralized screw. The quickest way to tell a Micro from an XXV/25 is to look at the recoil cover. It's quite different. Here's my Craftsman 2.1A (on the right). It's the same as a Poulan 25DA................an XXV series saw. Compare that starter to your Skil/Poulan Micro. The saw on the left in my pic is a Craftsman 1.9. That's the same as a Poulan XX-D. That's a third saw family, which shares basically nothing with the Micros or the XXV's.

000_0178.jpg

GEDC0298.jpg
 
Jacob J. said:
I can do the handle but my clutch covers are pretty shabby.
Click to expand...

Sounds good. It has a good plastic cover now. The wife said she might as well see the cover since see has a good market for it. I may have a fair one to swap out. The took a hit that bent the front handle bad. Also it cracked the front attaching point on the rear handle. But i can deal with that. Nice looking low houred saw other wise.
Do you need any thing else stuffed into your 2095 box?
Bob
 
I am looking for some small stuff to finish up a couple of recient projects, I will order new stuff in a couple days if i get no hits.

2- 066 guide bar plates

roller catcher

clutch cover chain guides

and maybe a set of larger bucking spikes.


Thanks!
 
Modifiedmark said:
Aaron, the wingnut has a cover on the way for him. Your correct on your lesson though thats for sure but I forgot how many different covers they used on the micro variations over the years as well.
Click to expand...

I just talked to the wingnut on the phone a couple hours ago. He told me you'd sent him a cover by way of the C.B. Big Homelite Express.....:cool2:
 

Similar threads

V
Lots of Questions about Axe Hanging
Replies
3
Views
1K
thomasinvancouver
T
J
Hello!
Replies
9
Views
1K
jackrabbit
J
HumBurner
Sold 181/281 Parts Saws and various NEW parts
2 3
Replies
44
Views
5K
davidwyby
davidwyby
Whiskey_Bravo
What tests would you want to see on a battery powered top handle saw?
2
Replies
33
Views
3K
Dcsco
D
R
New Saw suggestions
Replies
16
Views
1K
ReddTigger
R

Latest posts

Back
Top