Swap meet...

[discounthunter]

looking for poulan d176 or d196 mount bars 20" or longer . for a 5400.

also a 28" or longer dolmar (husky large lount) in .58 fits 143.(d033)

 

[leecopland]

Mcculloch 1-42

I'm looking for a muffler. Looks like one that is used on many old Macs

Thanks,

Lee:msp_biggrin:

PS I also need the carburetor grommet please and maybe an air filter.

 

[husqvarnaguy]

I need a coil for a 23 HP Kawasaki FH680V. Need to cut some grass and trying to save a few coins.

Green stuff and/or parts to trade?

I may have one. Let me check but I might have thrown it out. What is the PN?

 

[tomdcoker]

Lets see... its got a grey plug wire, with a black that goes to the kill switch, has the brass contact on the far end of the black... its got a white grounded wire to the frame of the coil.. and its numbered: 2 204 222 094
and labeled germany! Let me know if this helps!

You were wanting some 026 parts. The only thing I have is an airfilter. The part number is 1121 120 1609. I can not find this part number on the 026 or 024 IPL. It is the flocked type and in good condition except for stains. I would be interested in trading for the 028 module. If you are interested send me a PM with your address. Tom

 

[Jordan3605]

Figured there might be someone who needs this.....
Brand New Chain for wood carving rotary tools. (or could be for a 1" chainsaw bar):tongue2:
"40014 14 Tooth Circlet
To Be Used Only With
Lancelot Models
45814 & 47814"

Markings on chain are as follows:
Rakers are mark with "25"
Drive Links mark with "72"



Sealed package from Oregon.
Let me know if you could use this.

 

[Nardoo]

Looking for a nice muffler front (or complete muffler) to fit a Dolmar 6000i.
I have the rear half from a 120 Si which fits. (The fronts from a 120S and 120Si will fit.) These mufflers are NLA here. Got $$ if you do not mind sending it to me in Oz.
Could also use a bucking spike 030 250 010 (the three pointed one)

Al

 

[Mastermind]

Looking for a nice muffler front (or complete muffler) to fit a Dolmar 6000i.
I have the rear half from a 120 Si which fits. (The fronts from a 120S and 120Si will fit.) These mufflers are NLA here. Got $$ if you do not mind sending it to me in Oz.
Could also use a bucking spike 030 250 010 (the three pointed one)

Al

I may have that Al. I'll check in the morning to see if the condition is good. If I forget please PM me. I get distracted easily. :msp_sneaky:

 

[nstueve]

anyone got a spare 024 or 026 piston laying around in good conditon... or a spare new one? if not I can order from northwoods, just thought I would stop by here first!

PM ME!

 

[Mastermind]

I'm building a saw for a good friend........he told me that in his opinion the Husky 55 is the world's best chainsaw. Well this guys a 73 year old Vietnam Veteran.......he will have himself a Husky 55.

I do need a couple of bits to finish it though. I need a throttle rod, a choke lever, and a good clutch cover with working brake.

I have lots to trade and of course the ever popular worthless gubermint notes.

 

[67L36Driver]

In the past several days was someone looking for a Stihl 14" x .043 x 'Pico' bar/chain?

I have no use for the nasty furrin' thing.

WTH is 'Pico' anyway................................................

 

[Saw Dr.]

ok,, i am lost,, i don't remember that but i don't remember what i did yesterday :biggrin::biggrin:
matt is taken care of,, i am sending him a 16" 325 out today
what i was looking for is a 12" (preferred)or 14" 3/8lp 50 gauge,, i have a bunch of chain on a roll and a bunch of new loops,, the 12" i have is in real good condition but its 043 gauge,, now i think the 14" bar i have is 43 gauge too,, i would be more then happy to trade both of them to you for the 50 gauge
thanks

I'll grab you a 12" .050 picco bar today. PM me an address.

Via Samsung Galaxy S3. (Using no copied Apple technology.)

 

[GeeVee]

In the past several days was someone looking for a Stihl 14" x .043 x 'Pico' bar/chain?

I have no use for the nasty furrin' thing.

WTH is 'Pico' anyway................................................

Pico is the ingredient half of Pico De Gallo. Peek-o Dee Guy Yo

A mexican condiment/dip/salad. Chopped Tomatoes, White onions, Jalepeno peppers, Cilantro, cucumber, and a little Apple vinegar or lime/lemon juice.

What you have there, is a perfect tool to make this dish. Just slap that bar and chain back on an MS 170, fill the oil tank with canola oil, and mix all ingredients in a big stainless salad bowl, serve with Tortilla chips and Sangria, or a Margarita.

 

[o8f150]

I'll grab you a 12" .050 picco bar today. PM me an address.

Via Samsung Galaxy S3. (Using no copied Apple technology.)

thanks saw garage,, pm sent

 

[Mastermind]

I'm building a saw for a good friend........he told me that in his opinion the Husky 55 is the world's best chainsaw. Well this guys a 73 year old Vietnam Veteran.......he will have himself a Husky 55.

I do need a couple of bits to finish it though. I need a throttle rod, a choke lever, and a good clutch cover with working brake.

I have lots to trade and of course the ever popular worthless gubermint notes.

Bumping to the new page and day. :msp_smile:

 

[350jeepcj5]

I need a right case half for a ms460, does anyone know if a 046 is the same

 

[Scooterbum]

I may have one. Let me check but I might have thrown it out. What is the PN?

Looks like 21171-7034 or21171-7013

 

[ChainsawmanXX]

Bumping to the new page and day. :msp_smile:

I may have these. Let me check
Anything to help a vet!

 

[ChainsawmanXX]

Looks like 21171-7034 or21171-7013

Hey scooter!

Did you get a chance to check on them 075 parts?

 

[Arrowhead]

In the past several days was someone looking for a Stihl 14" x .043 x 'Pico' bar/chain?

I have no use for the nasty furrin' thing.

WTH is 'Pico' anyway................................................

Mattmechanic was looking for a bar... I don't know if he found one yet.

 

[o8f150]

Mattmechanic was looking for a bar... I don't know if he found one yet.

he did ed,,,, it left my house yesterday heading his way