Swap meet...

Advertise with us
shop deals on amazon
Treestuff
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looking for bar studs for a Husky 362 (small mount Husky). Several years ago I stripped one and had a shop replace it. I think they replaced both because now I can't mount the outter spike. The studs are too short - there'd only be a couple of threads on the stud nuts. Without the spike the studs don't even come out past the end of the nut.
 
Flat47 said:
Looking for bar studs for a Husky 362 (small mount Husky). Several years ago I stripped one and had a shop replace it. I think they replaced both because now I can't mount the outter spike. The studs are too short - there'd only be a couple of threads on the stud nuts. Without the spike the studs don't even come out past the end of the nut.
Click to expand...
501815701 only $2.86 each at ereplacement, did you drain it and see if he got them in straight or pulled them in all the way?
 
Where is everyone? It's like all of the saw lovers have left us for lawn mowers or weedeaters! We can't put up with this, I want to sell parts, buy parts, smell fuel mix while I eat supper with the wife bi+ching. WHERE IS EVERYONE!!!:sucks:
 
kz1000 said:
Where is everyone? It's like all of the saw lovers have left us for lawn mowers or weedeaters! We can't put up with this, I want to sell parts, buy parts, smell fuel mix while I eat supper with the wife bi+ching. WHERE IS EVERYONE!!!:sucks:
Click to expand...
I guess it's just us and the wolves...
 
Ok! I could use all of the parts for a 268xp, from the carb back and a top cover, I have some good 254 -262xp carcasses and a lot of odd ball Mac and what not parts. I need to turn a Jonsered 920(new piston) Stihl 045 (runs great) I need chain brakes for Huskies in the same range as before-0--------- HELP! I CAN'T STOP! Anyone need a bunch of lime green saw part?:mad::confused::p:D:blob2::sucks:
 
lumberjackchef said:
Got a clutch side case half for a 2171 or 372 anyone? I tore it down with all parts on the bench for a nice new rebuild and a BB Kit only to find that the case is badly wallowed out around the bearing:cry::blob2::cry::blob2::cry:.....
Click to expand...

I have a clutch side Jonsered 2171 case. Got any good parts for big Stihls or Huskys?
 
jimbo1490 said:
I'm interested, What sort of Husky parts are you looking for?
Click to expand...
I'm into the 66, 266, 268, 272 family - so just about anything from them. And I'm looking for a 372 part saw. I like box-o-parts and basket case saws. Whole or partial saws or whatever. Try me - I'm open to just about anything. Send me a conversation.
 
Alright guys, I'm begging for help here. I just acquired a great John Deere CS46. This thing I bet doesn't even have 20 hours on it and I have it running like a top. The bad news is, the previous owner left it outside for some time after it quit running. All the plastics are beyond sun faded and look horrible. It is just too nice a saw to leave that way. Does anybody have any plastics for this saw in good shape? I need it all, starter cover, top cover, air filter cover, choke lever, throttle safety lever, clutch cover, etc. Please let me know what you have. Thank you.

BTW, best way to let me know is by PM.
 

Similar threads

V
Lots of Questions about Axe Hanging
Replies
3
Views
1K
thomasinvancouver
T
J
Hello!
Replies
9
Views
1K
jackrabbit
J
HumBurner
Sold 181/281 Parts Saws and various NEW parts
2 3
Replies
44
Views
5K
davidwyby
davidwyby
Whiskey_Bravo
What tests would you want to see on a battery powered top handle saw?
2
Replies
33
Views
3K
Dcsco
D
R
New Saw suggestions
Replies
16
Views
1K
ReddTigger
R

Latest posts

Back
Top