What is the RPM max on an 041S?
14,500
What is the RPM max on an 041S?
LOL
Even with 11cc more displacment?
14,500
And max RPM on a 361?
361 = 15,100
460 = 15,000
260 = 15,600
:greenchainsaw: That's where mine cut best and have a nice cocoa brown plug.
I have the spec on the 041 FB somewhere.
Even so, I'd have to believe it would have more hp. Remember hp is derived from torque. If the rpm is the same and torque is more, then hp must be also.
Not if they move the max torque point down to a lower rpm!
But at that rpm the hp is still higher. Even if peak hp is the same, the average hp is greater.
Not necessarily..... move your torque point down - more torque at less rpm - it can be the same hp number. At the top end, for all we know the torque at 10,500 is the same for both saws, which would make the HP the same at that rpm. Peak Hp will be at a lower rpm, but not necessarily coincidental with peak torque. If we had torque and hp curves verses rpm for both saws, it would be easy to see what is going on.
Not quite yet...but its working its way up the ranks or should I say down the ranks .
Enter your email address to join: