Baily's 6401

[jhellwig]

6401 for 499.95
7900 for 689.95

And a piston and cylinder kit for a 7900 costs what?




I think some higher power is wanting me to have one of these saws.

I am going to check the local dolmar dealer this weekend and if they are lame I think bailys may be selling me a 6401 the next chance I get.

 

[RiverRat2]

Not sure about the p/c kit ????? BUT,,,,,

6401 for 499.95
7900 for 689.95

And a piston and cylinder kit for a 7900 costs what?




I think some higher power is wanting me to have one of these saws.

I am going to check the local dolmar dealer this weekend and if they are lame I think bailys may be selling me a 6401 the next chance I get.

You Go Boy!!!!!!!

but it seems like to me if you nbuy the 6401 for 500....and gonna spend the cash for a P/C why not spend it up front and get the 7900 and b e done with it????

HELLO!!!!!!!

 

[Lakeside53]

P&C (OEM ) is about $189-199 Plus freight.. so you can't win... unless you can sell your 6401 P&C..

 

[sedanman]

Unless you can drive to Bailey's I doubt they'll be selling you a Dolmar.

 

[MikeInParadise]

Unless you can drive to Bailey's I doubt they'll be selling you a Dolmar.

Sure they will... It is just blue and says makita on it...

http://store.baileys-online.com/cgi...ategory/se=10116/op=eq/ml=10.html?id=mQWIY7Jg

 

[taplinhill]

Bailey's new catalog has dolmars in it.

 

[manual]

Unless you can drive to Bailey's I doubt they'll be selling you a Dolmar.

Sure they will... It is just blue and says makita on it...

http://store.baileys-online.com/cgi...ategory/se=10116/op=eq/ml=10.html?id=mQWIY7Jg

Same same, Hey more twins!!!!!!!!!

 

[manual]

Sure they will... It is just blue and says makita on it...

http://store.baileys-online.com/cgi...ategory/se=10116/op=eq/ml=10.html?id=mQWIY7Jg

I just wonder does Makida say "Made in Germany" ?
Or does the Dolmar say "Made in Japan" ?

 

[robby26wi]

They are both made in germany....I would buy the 6401 and a 7900 piston and cylinder and then ebay the brand new unused 6401 piston and cylinder and you will have one very inexpensive 7900 in a blue skirt

 

[SawTroll]

6401 for 499.95
7900 for 689.95

And a piston and cylinder kit for a 7900 costs what? .....

Imo, the 7900 would be the better deal.

 

[robby26wi]

How do you figure? the piston and cylinder is like 190 and thats how much more the 7900 is isnt it? The piston and cylinder would bring 125 on ebay easily...so 499 + 190 = 690-125=565....565 for a 7900 is a great deal...

 

[robby26wi]

I forgot also the 7900 is more then likely powerhead only and the makita comes with a 20" bar...Get the blue one

 

[manual]

How do you figure? the piston and cylinder is like 190 and thats how much more the 7900 is isnt it? The piston and cylinder would bring 125 on ebay easily...so 499 + 190 = 690-125=565....565 for a 7900 is a great deal...

125.00 for a p/c. Not no more.
Theres is going to be a but load of 6401 used p/c on ebay now.

 

[robby26wi]

he will still get it....Not everyone knows you can throw a 7900 cylinder on a 6401....Even if he only gets 100 its still way cheaper to go the makita route...Pretty decent bar and chain on it also...

 

[SawTroll]

How do you figure? the piston and cylinder is like 190 and thats how much more the 7900 is isnt it? The piston and cylinder would bring 125 on ebay easily...so 499 + 190 = 690-125=565....565 for a 7900 is a great deal...

Do you really think there will be a large market for the 6400 P&Cs - not likely imo, as most that need one probably will want to upgrade.........

Less hazzle to buy the saw as you want it, also.

 

[robby26wi]

if they would have had them when i bought my 7900 i woulda went that route...Bar and chain is another 40-70 you might as well tack onto the 7900..

 

[manual]

No I don't think there will be an over run.
Not everybody knows this.
I was just Joking.

Now if you include your time in this great savings. R&R P/C, Plus Selling other P/C what would have into it.

 

[SawTroll]

No I don't think there will be an over run.
Not everybody knows this.
I was just Joking.

Now if you include your time in this great savings. R&R P/C, Plus Selling other P/C what would have into it.

Looks like we agree on something here......... opcorn:

 

[manual]

I can get a Dolmar 7900 with 20" bar and chain for $650.00, plus no shipping cost.

 

[robby26wi]

thats a good deal but the other way is still almost 100 in hand....r&r on new stuff is fun lol...Its the old dirty crap that sucks...