Stihlcutter
ArboristSite Operative
Your guys tech talk is confusing me. So will the P&C I want to get from Baileys work? And if not steer me in the right direction. PleaseSo does mine but it did not come that way from the factory. 044 angled fin cylinders work really well on a 12 mm pin crankcase. The 12 mm pin cylinders with straight across fins won`t work on a stock 10 mm crancase using a stock 10 mm pin piston due to ring location pins. Just move the pins and voila, the newer cylinder works fine. The OEM 046 P&C can be used on a 10 mm saw if pin bushings are made up with outer ends capped and the 10 mm pin shortened to accomodate the end capped pins, original C clips still retain the pins on the 12 mm piston.
Pioneerguy600
Thanks,
Anthony