Sure is quiet in here....do I need to start a fight?

[pioneerguy600]

Bet this thread is near top of the page right now,..gotta go looksee.

 

[roncoinc]

Yyaaaaaaawwwwwwwnnnnnnnnnnnnnnnnnnn!!!!!!!!!!
Sucks to be an old fart..

 

[pioneerguy600]

Yyaaaaaaawwwwwwwnnnnnnnnnnnnnnnnnnn!!!!!!!!!!
Sucks to be an old fart..

Yup,..it must.

 

[pioneerguy600]

Time for me to sign out for tonight, its 11 pm here and I will have to be up in 4.5 hrs for my long trip tomorrow.
Nytol.

 

[caleath]

Well I didnt make it in time to post up. Jerry have fun on your trip. I will keep things in line here .

Heck I thought I found a good deal. You dont find many good deals around here anyway.

 

[caleath]

Good morning everyone...Jerry be careful on your trip. Take some rain gear it look like you will need it.

 

[roncoinc]

I may get to do some saw work today
coldest day this week,will be warming up so it's time to defrost the freezer when i can set stuff outside..
when thats done have a couple simple saws to get going..so i can buy food to puit in the freezer !!

 

[caleath]

Warmest day for us....it was 9 degrees last week now 70 today.

 

[caleath]

What no Jerry and the place goes to pot?

 

[roncoinc]

Stihl sucks.........

 

[caleath]

Nah Husky sucks....

Where is Jim....?

You get any work done?

 

[roncoinc]

Nah Husky sucks....

Where is Jim....?

You get any work done?

Actually i did,a nice older homeowner saw is ready to go and two carbs in the USC now..
i live by them cheap saws,,sell easy on CL.. lot easier for them to come up with $50 than $200.
crap !! ,, gotta lull the carbs and squirt em out with carb cleaner now !!
tnx for reminding me !!

 

[caleath]

That has been the issue for me too. I like working on the pro saws..but most folks cant afford them rebuilt.

I am doing that 034 for a customer that requested a pro saw, I probably wont make a dime. The customer will be happy and he will spread the word for sure.

 

[roncoinc]

That has been the issue for me too. I like working on the pro saws..but most folks cant afford them rebuilt.

I am doing that 034 for a customer that requested a pro saw, I probably wont make a dime. The customer will be happy and he will spread the word for sure.

One of the carbs i just did is for an stihl 03X sumthing,like WHO cares anyway ??
got it in the original case with tools even,overpaid at $25 ,really clean and should be able to get $100 or so for it.. maybe i put that back together tomorrow and see if anything ELSE wrong with it

shoot,gotta bring the 041av by the machine shop for a new helicoil for the handle bolt.. then try to dump that one.
not a good time to sell saws,maybe should wait untill spring ??

 

[caleath]

I am only getting saws for folks as they ask for them. If I can find them cheap enough I will get them.

I know where everyone is now...watching that train wreck of a thread about the missing saw.

 

[caleath]

Oh snap here comes trouble. Hi Jim

 

[jimdad07]

Trouble. I'll tell you what trouble is, trouble is the 80cc saw in my back room that is going by way of Fleabay. That's trouble. It's killing me. Not a bad saw, ran it today when I got home and it seems to have pretty good balls, not as much as a 7900, but pretty darn good. I'll just have to save my pennies for a nice used 066. Going to be very busy come next week, on call for another two week stint. Hate to post and run, but I have to be up early and out the door, have to work about 80 miles away and need to t be there by 7:00am. Hopefully I can get some time the chat with you guys tomorrow night.

 

[caleath]

You are a drive by poster I see...whats with the saw? Did you buy it to sell? Be careful driving tomorrow.

 

[caleath]

I had to come back in here where there is sanity.

 

[cbfarmall]

I had to come back in here where there is sanity.

I'm badmouthing those threads every chance I get, just short of calling the OP stoopid.

Chris B.