Would the top cover of a 2077 (I think) work? I am not very familiar with the newer Jonsereds. I'm picking up a toasted 2077 today.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Would the top cover of a 2077 (I think) work? I am not very familiar with the newer Jonsereds. I'm picking up a toasted 2077 today.
ChainsawmanXX
Addicted to ArboristSite
Pm me for info.
Imma scrounge around and see what parts i can find. I need to start making room as i just got a truckload of parts an stuff and i cant fit everything in my 8x15 shed.
o8f150
Tree Freak
Pm me for info.
Imma scrounge around and see what parts i can find. I need to start making room as i just got a truckload of parts an stuff and i cant fit everything in my 8x15 shed.
what model is the 1st and 3rd stihl
ChainsawmanXX
Addicted to ArboristSite
The clamshell is an 029 super.
Both other stihls are 028 wb, the one with the bar is an AV.
038. The top covers are rough lookin. But could clean up with the right stuff. The cyl cover has burn marks from the exhaust all the way through. The piston is good, cyl questionable?
Next is a 170 clutch cover.
Then 2150/350 p&c needs rings.
Ran when i took it off the saw.
Both other stihls are 028 wb, the one with the bar is an AV.
038. The top covers are rough lookin. But could clean up with the right stuff. The cyl cover has burn marks from the exhaust all the way through. The piston is good, cyl questionable?
Next is a 170 clutch cover.
Then 2150/350 p&c needs rings.
Ran when i took it off the saw.
sefh3
Addicted to ArboristSite
watcha needing or wanting in trade for these saws?
ChainsawmanXX
Addicted to ArboristSite
thats it for now.
Im not sure what that top cover goes to?
Bump....
2077 is not even close.
barneyrb a 2165 one piece will work.
Took me awhile to find a used 2 piece set for the 2171 I had. I'll keep a eye out though.
Thanks, I've got 2 I'm building and only one cover and it is a 2165 one piece.
2165 1 piece Chainsawr jonsered 2165 chainsaw top cover shroud
2171 carb cover Chainsawr jonsered 2171, 2163 turbo chainsaw air filter cover
You might check with Scott on the cylinder cover. That is where I got my set and they wasnt listed.
Ouch 2171 cyl cover Chainsawr jonsered 2171, 2163 turbo chainsaw top cover engine shroud with clips
Parts to trade!
Looking to trade for some 026 parts and bar and chain. Here is what I have to trade:
Husqvarna 20" 3/8 bar. Rails and sprocket in good shape.
Husqvarna 141. Missing top cover, carb, and starter rope is broken. Piston is fried have not taken apart to check cylinder.
What im looking for:
026: Needed - Oil Seals, Decomp Valve, Adjustable Oiler, Cylinder and Piston
Poulan/Craftsman: 16" bar and chain for 2375 and hand guard that attaches to the top handle
PM me. Will trade or take paper
image by llzebraheadll, on Flickr
image by llzebraheadll, on Flickr
Looking to trade for some 026 parts and bar and chain. Here is what I have to trade:
Husqvarna 20" 3/8 bar. Rails and sprocket in good shape.
Husqvarna 141. Missing top cover, carb, and starter rope is broken. Piston is fried have not taken apart to check cylinder.
What im looking for:
026: Needed - Oil Seals, Decomp Valve, Adjustable Oiler, Cylinder and Piston
Poulan/Craftsman: 16" bar and chain for 2375 and hand guard that attaches to the top handle
PM me. Will trade or take paper
image by llzebraheadll, on Flickr
image by llzebraheadll, on Flickr
Last edited:
wigglesworth
Booned
Ahhh haaa!
Dis whut Jews bee's kneading?
That's a standard 440 cap beside it.
is that an alligator worm in front of it?
wigglesworth
Booned
Ahhh haaa!
Dis whut Jews bee's kneading?
That's a standard 440 cap beside it.
I'm gettin better at understandin that KY mountain talk. Jus give me time and I'll have it figgrd out.......
Negative my friend. Just a soggy, bar oil soaked noodle.
You do get an 'Aw ****' for the greasy, dirty workbench........................................................................:msp_tongue:
Dropped below 60 in the garage, mine won't get straightened out or cleaned up till spring..........................................
wigglesworth
Booned
All it takes is a few sips from that ball jar, and it'll all become clear.
How did that work out for ya, BTW?
U should see the rest of the shop. That there is the clean spot.
I got good heat in there though, so no real excuse. :/
rms61moparman
Addicted to ArboristSite
All it takes is a few sips from that ball jar, and it'll all become clear.
How did that work out for ya, BTW?
U should see the rest of the shop. That there is the clean spot.
I got good heat in there though, so no real excuse. :/
If you are busy enough workin' ya ain't got time to stand around and clean!!!
Mike
That's my story and I'm stickin' to it!
Mastermind
Work Saw Specialist
Ahhh haaa!
Dis whut Jews bee's kneading?
That's a standard 440 cap beside it.
Your parts are dirty.
thomas1
sodium pentothal
- Joined
- May 2, 2010
- Messages
- 3,651
- Reaction score
- 1,092
You're dirty.
Similar threads
