I don't have a clue on that, I know that 254,257,261 and 262 are the same. This is really a basket case that will never be pretty, so I can't put a lot into it.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Rob was replying to another post about a crankcase for a Poulan saw.
Oo
ps,,,,,,,
ps,,,,,,,
Tractorsaw1
ArboristSite Guru
I believe the 6900, 7700, & 8500 are the same, not real sure about some of the others
timberdollars
ArboristSite Operative
Anyone have a Full wrap for a 2171/2172 ? Could use both top covers too, and LARGE west coast dogs, Or entire 2165/2171
Wagnerwerks
The underdog..
I've got a 262xp that needs a piston and rings and maybe a crank (it's a little wiggly ). It's decent looking and you could probably run it with just a new ring. It ran when I got it, but it had low compression. It is not burned up. It's pulled apart to the crank case and cleaned up a bit. Everything's there. Maybe Looking to trade for a 346-359 project. Something like that or ???? I have a bunch of other parts to make up the difference or a little cash if need be.
Also still looking for a full wrap for my 365, a starter for a 315 echo, and maybe a p/c for a poulan 335-365.
Also still looking for a full wrap for my 365, a starter for a 315 echo, and maybe a p/c for a poulan 335-365.
SkippyKtm
The Lorax, my FIL rip...
Hi Kris, I sent ya a pm...
Herr(?) sprocket drum number A2-408? Is it a Remington Bamtam type .404" x 8 tooth or 7/16" pitch?
Took a stab at one on evilbay. Your help is appreciated.
Carl.
Took a stab at one on evilbay. Your help is appreciated.
Carl.
Need a bunch of this and that for a Husky 141:
the little clips that clip on to the case and the top cover screws thread into the clips (530 01 59-22, all 3 of 'em)
clutch spring (530 09 41-88)
clutch drum (either 530 06 93-42 or 530 06 93-15)
clutch cover and handbrake assembly
026, 046 parts and green paper to swap
the little clips that clip on to the case and the top cover screws thread into the clips (530 01 59-22, all 3 of 'em)
clutch spring (530 09 41-88)
clutch drum (either 530 06 93-42 or 530 06 93-15)
clutch cover and handbrake assembly
026, 046 parts and green paper to swap
I have some of those parts- clutch cover/brake, clutch and I might have the drum.
Eccentric
Mister Wizard
I probably have the drum and the clips for you. Will have to check for the clips and screws.
Duke Thieroff
Fill your hands, you SOB!
Wagnerwerks
The underdog..
You really want to get rid of those sprockets! 
Duke Thieroff
Fill your hands, you SOB!
Just trying to move em out to someone who can use em...
Anyone have a tank/handle assembly for a Husky 334/335/338 T series saw?Or a parts saw? I have Stihl 028, MS 210/021/025 and lots of other stuff to trade.
I also am looking for an ignition system for an Echo 650EVL.I believe it has a trigger and coil?
RR
I also am looking for an ignition system for an Echo 650EVL.I believe it has a trigger and coil?
RR
Last edited:
I tried to locate an Echo 650 evl coil assembly on Saw Salvage,no luck with Echo at all.Do you have one?
PM me please
RR
Duke Thieroff
Fill your hands, you SOB!
PM sent!
Is yours the two-piece? I Have a 660 parts saw and it may be possible to put my flywheel and coil together on your 650. Mine has the one-piece electronic ignition.
Duke Thieroff
Fill your hands, you SOB!
This is what I have. It appears to be made up of a coil and a trigger as a separate piece.
I may also have the flywheel for it. I'll have to check my bin.
Similar threads
