Swap meet...

[smilin possum]

Well it's worse than I thought.
Anybody got a good crank for an 880 laying around.
This saw is going to need a total rebuild since we tore it plumb down it needs more than I was hopeing. Any help would be nice.

 

[volks-man]

any chance there is a p/c for a jonsered 1020 out there?
may be the same as powermac 1000 and partner p-100.

i'd even take a ruined/worn set if that's all i can get. i would like to use it for measurements and sizing stuff up.

 

[Kwdog75]

Managed to widdle down my original wish list.

Still looking for a 372xp upper rear anti vibe spring and a large mount husky
24" bar (it can be ugly).

Have some cash, 16" .325 Stihl bar, 031 parts, stihl cutoff saw parts etc.

I could use the 16" .325 Stihl bar, got some cash for it if interested.

 

[roncoinc]

I have one more XL12 I need to get together. I need these parts to finish it up:

Air filter and cover
Inner and outer guide plates
A complete muffler

I've still got a good tank, rear handle, and full set of bushings for a Dolmar 133/143, and a half wrap in good shape.

I think i got all that Xl12 stuff under the shop.
will take a look today.
PM me so i can send pix.

 

[PogoInTheWoods]

Managed to widdle down my original wish list.

Still looking for a 372xp upper rear anti vibe spring and a large mount husky
24" bar (it can be ugly).

Have some cash, 16" .325 Stihl bar, 031 parts, stihl cutoff saw parts etc.

Would you happen to have an 031 air filter cover?

Poge

 

[DSS]

Would you happen to have an 031 air filter cover?

Poge

I think I have one if he doesn't.

 

[mowoodchopper]

Anyone have a stihl mount bar for a 026, 16 or 18????

I have a 20 inch stihl 325 bar and also a NK 18 inch Jhonsered bar that i dont need.

 

[Garden Of Eden]

ok, I've got 2 complete craftsman 2.0/poulan 2000 saws. They're only missing pistons, and one cylinder. Whatever ya need, let me know, I'll ship if we can work something out.

I need/want: Side pull cover for a echo 300t

Almost anything for a pro-mac 610

Small prussic type pulley (1/2")

Info/files for chain sharpening. I want to learn, i'm sick of buying new ones, and I've got a ton of good metal here...

Any of this is flexible with cash too.

Let me know.

God bless,

Jeff

 

[sefh3]

ok, I've got 2 complete craftsman 2.0/poulan 2000 saws. They're only missing pistons, and one cylinder. Whatever ya need, let me know, I'll ship if we can work something out.

I need/want: Side pull cover for a echo 300t

Almost anything for a pro-mac 610

Small prussic type pulley (1/2")

Info/files for chain sharpening. I want to learn, i'm sick of buying new ones, and I've got a ton of good metal here...

Any of this is flexible with cash too.

Let me know.

God bless,

Jeff

I just sent you a PM on the 610 parts. I have lots of em.

 

[mweba]

Looking for a Stihl large mount 36"+. I have a 24" .063 .404 for trade or.....

 

[Jacob J.]

Looking for a Stihl large mount 36"+. I have a 24" .063 .404 for trade or.....

Large mount as in 076/084/088/090?

 

[mweba]

Large mount as in 076/084/088/090?

Yes sir. Had a dolmar bar located but sat on my but to long. Was not sure if it could be modified to work either.

 

[Hagstar]

Yup, I tried to find a good used 200T, the realized I couldn't find one. So I just bought a new one.

THAT'S the only problem with really well engineered products- very few used parts available. It's really a good thing- unless you need a used part! I love 10+ year old Honda autos. BUT try to find one in decent shape in the junkyard! I sold my '91 Accord before it turned 20 not because anything was really broken but because parts were hard to get.

John H.

 

[nvrs]

Poulan Pro 225 Bar

Looking for a new 14" bar with the yellow markings on it for my pp225 saw cleanup. The non pro green ones can be found anywhere

 

[HittinSteel]

Would you happen to have an 031 air filter cover?

Poge

Sorry, no I don't

 

[Bowtie]

Looking foe a throttle safety interlock setup for the handle that fits a Jonsered 2163/2171.

I have a lot of Stihl and Husky parts as well as cash.

 

[Saw Dr.]

Looking for a new 14" bar with the yellow markings on it for my pp225 saw cleanup. The non pro green ones can be found anywhere

What exactly is the difference between the green bars and the yellow ones?:dunno:

 

[drill.daddy]

i need a compression release for a stihl 090 and a flywheel puller. any help would be appreciated

 

[Jacob J.]

Yes sir. Had a dolmar bar located but sat on my but to long. Was not sure if it could be modified to work either.

I'll look and see what I have.

i need a compression release for a stihl 090 and a flywheel puller. any help would be appreciated

Wess- I have a large Stihl flywheel puller that's an extra you can have. It will pull the flywheel on all of the larger Stihl modern saws and many of the older saws. I think I still have a good address for you. I don't have the compression release but Bailey's has those.

 

[MS460WOODCHUCK]

I have these saw's to sell or trade. All of these run but the 015 and 020. The 020 will run if you want to pull on it long enough but it does not run right the compression is very good though and so is the 015's.<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=jason006.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/jason006.jpg" border="0" alt="Photobucket"></a>
PM me if your interested.