Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The 42" is a woodsmanpro husky mount lighty used with new tip, 36" reduced weight is a stihl mount and so is the 32" reduced weight and the 24" powermatch. All bars are 3/8"-.063"



Pm me on what you would want for the 42 and 36 bars please.
 
I have several NOS 14" Windsor speed tip in .375x.063 for stihl 3003 mount. These are good bars with the replaceable sprocket nose . I will trade, or sell outright. PM me if interested. I need a 20" ES bar, a good clutch for a 460/440 to name a few things.
 
Last edited:
038

I need some 038 parts:

clutch cover
clutch drum & related parts
oil pump gears & oil pump cover
Good air filter
Top handle
 
041 Farm boss for sale

how are you willing to pay much for my 041 farm boss? It runs pretty good but if you search my posts in my profile you can see the case is cracked where it attaches to the top handle. I'm told its fixable with epoxy but I don't want to screw around with it. comes with a Stihl full chisel chain that was only sharpened once.

Buying all crappy Stihl cylinders and saws.

Need some 361 parts:

clutch cover

air filter cover

air filter

Lots and lots to trade.....and $
 
Last edited:
how are you willing to pay much for my 041 farm boss? It runs pretty good but if you search my posts in my profile you can see the case is cracked where it attaches to the top handle. I'm told its fixable with epoxy but I don't want to screw around with it. comes with a Stihl full chisel chain that was only sharpened once.

If he didn't bite on the 041 I might.
 
024 026 028 parts

I'm looking for a carb for an 024/026 as well as top handle, air filter and filter cover. I could actually use 2 of the aforementioned parts. I have 024/026 parts to trade or a Husqvarna 50 Special that has a new P/R & runs. It might need a carb rebuild, haven't tinkered with it yet.
 
how are you willing to pay much for my 041 farm boss? It runs pretty good but if you search my posts in my profile you can see the case is cracked where it attaches to the top handle. I'm told its fixable with epoxy but I don't want to screw around with it. comes with a Stihl full chisel chain that was only sharpened once.

A picture would be great....
 
I need all kinds of 064 parts.


I also need a piston kit for a Stihl 180.

I have a bunch of stihl stuff, and cash.
 
bars/sprockets

i just came in to 17 oregon sprockets,9 bars mostly oregon,1 windsor speed tip 404 pitch,1 16"mcculloch sprocket tip for 1/4" chain,1 3/8 pitch 16"sugi hara,2 18" oregon power match.these are all new some have a few scratches thats all.if you are looking for a sprocket & can give me the oregon # ill look.or give me the #s off the bar you need & ill check.
 
sprockets

30678 (2),10608(3),28717(1)poulan,28004(2)poulan,mirco,28016(1)sthil,30666(1),27930(1),27958(1)homelite,30681(1),30688(1)homelite330,28000(1)echo,24139(1)partner,10629(1)mac.these are the spockets i have i just copied what was on the boxes i dont know if the saw matches the #s or not.
 
I got a Wizard 430 which is in great condition. The saw is actually a Poulan 306A. Anyone interested?
 
Back
Top