Swap meet...

[wigglesworth]

I need a good clutch cover for an 026/whatever else fits an 026.

 

[John Paul Sanborn]

Anyone want an old Poulan that needs some tuning? I got it from a client for the case.

 

[Honkie]

Anyone want an old Poulan that needs some tuning? I got it from a client for the case.

I will take it

 

[Wildman1024]

Wanted

Anyone have an 044 carcass that needs a rebuild? Also would be interested in a 357/359/371/2. Also would be interested in a makita 6401, stihl 034/036/038

Basically want a newer 60-70cc saw that can be a good work saw.

 

[pinemartin]

Anyone have an 044 carcass that needs a rebuild? Also would be interested in a 357/359/371/2. Also would be interested in a makita 6401, stihl 034/036/038

Basically want a newer 60-70cc saw that can be a good work saw.

PM sent

 

[John Paul Sanborn]

I will take it

Email me and I'll give you my address to send S&H money to.

 

[John Paul Sanborn]

I have a good friend who needs a good break for an 084AV from back in the early 80's. I don't have the sr# rightn now but could get it easily.

His works, but you have to grab it way down by the right pivot to disengage it.

 

[tomdcoker]

How old a Poulan. If it is old enough that it is a sand cast model I would be interested in it. Thanks Tom

Anyone want an old Poulan that needs some tuning? I got it from a client for the case.

 

[Kwdog75]

Parts for sale or trade....

Husky 394

3 cranks
2 oilers
3 inside felling dogs
3 carb bases
1 coil
1 clutch

Husky 371

1 crank
1 clutch

Husky 61

1 score cylinder, may be salvaged <- free, pay shipping

Also for sale a Husky 288xp and 394xp, both runners, please look in Tradin' post for those.

Still need Echo CS510 piston and cylinder

 

[John Paul Sanborn]

How old a Poulan. If it is old enough that it is a sand cast model I would be interested in it. Thanks Tom

Probably not that old, it is a standard green HO model that he dsaid has not run right for years. I never really looked at it, being a sans chainbreak saw.

 

[tomdcoker]

Thanks for the reply. Tom

Probably not that old, it is a standard green HO model that he dsaid has not run right for years. I never really looked at it, being a sans chainbreak saw.

 

[PB]

Parts for sale...

Husky 394

3 cranks
2 oilers
3 inside felling dogs
3 carb bases
1 coil
1 clutch

Husky 371

1 crank
1 clutch

Parts for sale or trade? If for sale, they should be in the tradin post. Don't want the thread shut down.

 

[PB]

Does anyone have AV mounts for an 031AV? Need just about all of them.

 

[Kwdog75]

For sale or trade. Sorry, long day.

 

[weimedog]

I have aquired a McCulloch 610 complete but in fair condition, two Poulan "parts" saws, one 3400 missing top cover & airfilter along with broken muffler. Good piston & cylinder. Another Poulan that is die cast with no chain brake. I can't find its model number but its missing only the outer half of its muffler. Looks to have a good cylinder & piston. My guess in the 55-60 cc range.

So I would like to swap out these for Jonsered parts saws of similar value. Age no issue. Older the better. Any interest, PM me and I'll send pics.

In addition saws I would swap for "Die Cast" era Homelites & J-reds are:

1) Stihl MS180. Runs real rich. Might need a carb or rebuild on that carb.
2) Homelite 340 (solo 54cc) Runs well. Needs new on/off switch. (I may have one)
3) Eager Beaver mini mac...needs carb kit and fue lines. Too much of a pain to work on for it to be fun.
4) multiple itterations of the new junker Homies. Good for someone I guess, One ranger in good condition. 33 & gutless, but great brush & limbing saw. A 27av.

 

[John Paul Sanborn]

if you are a chainsaw, everything looks like a log.

 

[Bowtie]

if you are a chainsaw, everything looks like a log.

If you are a log, you are a'feared of everything that resembles a chainsaw.

 

[volks-man]

I have aquired a McCulloch 610 complete but in fair condition, two Poulan "parts" saws, one 3400 missing top cover & airfilter along with broken muffler. Good piston & cylinder. Another Poulan that is die cast with no chain brake. I can't find its model number but its missing only the outer half of its muffler. Looks to have a good cylinder & piston. My guess in the 55-60 cc range.

So I would like to swap out these for Jonsered parts saws of similar value. Age no issue. Older the better. Any interest, PM me and I'll send pics.

In addition saws I would swap for "Die Cast" era Homelites & J-reds are:

1) Stihl MS180. Runs real rich. Might need a carb or rebuild on that carb.
2) Homelite 340 (solo 54cc) Runs well. Needs new on/off switch. (I may have one)
3) Eager Beaver mini mac...needs carb kit and fue lines. Too much of a pain to work on for it to be fun.
4) multiple itterations of the new junker Homies. Good for someone I guess, One ranger in good condition. 33 & gutless, but great brush & limbing saw. A 27av.

hey weim,
is this jred 52 any interest to ya?
i have not cleaned it at all. i have none of the missing parts in the pics. the piston is damaged. it looks like someone tried to stop the piston with something in the exhaust port and broke it. the cyl looks good on the intake side and through the plug hole the exhaust side still looks useable.
crank seems to turn o.k. but i don't wanna spin it over much for fear of killing the cyl.

 

[weimedog]

hey weim,
is this jred 52 any interest to ya?
i have not cleaned it at all. i have none of the missing parts in the pics. the piston is damaged. it looks like someone tried to stop the piston with something in the exhaust port and broke it. the cyl looks good on the intake side and through the plug hole the exhaust side still looks useable.
crank seems to turn o.k. but i don't wanna spin it over much for fear of killing the cyl.

yep...it is.

 

[epicklein22]

Still looking for that elusive 036 cylinder.....lots to trade including greenbacks.