Warped5
WingNut
Jon's the ONLY ONE to whom I've ever sent a dead mouse and now he's taking shots at me. Nice.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Jon's the ONLY ONE to whom I've ever sent a dead mouse and now he's taking shots at me. Nice.
Eccentric
Mister Wizard
Looks like a pair of PM600-series saws, a Mac 15, and a McCulloch 250. Check out the custom 'high rise' spike mounting possition on the 250. People do strange things.
Hi John - What does it say on the top sticker for this one? Thanks!
From what the guy told me there were 2-250s & 2- 610s.I may be able to get more pics.I don't have them a guy not far from me does.I have not seen them in person.
Duke Thieroff
Fill your hands, you SOB!
Anyone have any interest in this?
Runs good, idles, oils, has no busted up parts and is low hours as there are still machine marks on the slug.
May want to do a fuel line just for insurance, and throw a new chain and air filter on it. It's wearing a 20" Stihl bar.
Sorry I don't have any shop talk vids to go along with it.
Looking to trade for saws, or crumpled green junk.
By the way I'm looking for an air filter for a Johnny's Red 49sp.
Chris
Runs good, idles, oils, has no busted up parts and is low hours as there are still machine marks on the slug.
May want to do a fuel line just for insurance, and throw a new chain and air filter on it. It's wearing a 20" Stihl bar.
Sorry I don't have any shop talk vids to go along with it.
Looking to trade for saws, or crumpled green junk.
By the way I'm looking for an air filter for a Johnny's Red 49sp.
Chris
tomdcoker
Addicted to ArboristSite
Stihl 020 AVP
I need the top av mount that attaches to the rear of the top handle of the above saw. If anyone has one that they will sell send me a PM. If not the part number would be nice. Thanks Tom
I need the top av mount that attaches to the rear of the top handle of the above saw. If anyone has one that they will sell send me a PM. If not the part number would be nice. Thanks Tom
Fairly decent old saw. Idles and runs nice. Spark and compression are good, piston looks great. Pull rope is a little short, clutch cover is cracked and has been cut away at some point (not sure why), old style spark plug and boot. Looking for an 028 or 031 (project or not). What do you have? Open to all options.
PM sent.
Chris B.
Anyone have any interest in this?
Runs good, idles, oils, has no busted up parts and is low hours as there are still machine marks on the slug.
May want to do a fuel line just for insurance, and throw a new chain and air filter on it. It's wearing a
Sorry I don't have any shop talk vids to go along with it.
Looking to trade for saws, or crumpled green junk.
By the way I'm looking for an air filter for a Johnny's Red 49sp.
Chris
What are you looking for in trade??
Warped5
WingNut
Husqvarna 55 - 46mm
I'm looking for a good used 46mm cylinder for my Husqvarna 55. Thanks in advance.
I'm looking for a good used 46mm cylinder for my Husqvarna 55. Thanks in advance.
jimbo1490
ArboristSite Guru
I have a good used OEM 2095 cylinder. Not perfect but very good.
Jimbo
Jimbo
As usual I'm looking for:
Jonsered parts, pretty much anything that'll work on a 2095.
Fuel system parts, including carb kits, for Poulan 3700, 5400, & SD25.
Good p&c from an Echo CS-520opcorn:, also the brake band.
I supposed durable fibre paper with fancy engraving print would be acceptable under the right circumstances
Trading for some furure porting on the Jonsered 2095 is a possibility.
I'm looking to clear out a couple of project saws that I'll never got around to working on. If you need photos there might be some floating around AS, or I can email them, or upload them to Photobucket. Ask questions, & I'll check if I don't know the answer (before you even ask, the meaning of life is 42, & the secret to happiness I have no idea). Up for trade:
Poulan 361 rebadged as a Wright 136....Homelite C-72, someone previously contacted me ???, I need to check my PMs....Lancaster 6-45 (I think)....Poulan 3400....Stihl 011/009--Variety of misc. parts....Jonsered 920 carcass....Disston DA-211 very incomplete, some NOS parts....Titan 40 nearly complete....Misc sprockets & chainsaw parts.
jimbo1490
ArboristSite Guru
I have quite a stash of NOS Jonsered air filters. The thing is, most don't have any part numbers written on them and they are mostly out of their original packages. If you could post o pic of the 920 filter, I'll see if one is lurking in my stash.
Jimbo
Jimbo
Trying to finish a Stihl 050 project. Would like to locate the plastic cover that goes over the AV buffers at the front of the saw. The cover does not show in the IPL I have (or I'm blind), so I don't know what part number to hunt for. If you have the part or the number, I'd appreciate the help.
jimbo1490
ArboristSite Guru
I've got a stack of NOS 49sp filters. Just PM me your address and I'll ship you one.
Jimbo
Duke Thieroff
Fill your hands, you SOB!
Liquid Gooooooooooooooooooooooooolllllllllllllllllllllllllllllldddddddddd!
You have a PM
Chris
Scooterbum
Addicted to ArboristSite
What are you looking for out of that Mac15?
nmurph
ArboristSite.com Sponsor
I have one that needs a new home. Let me know Tbones falls through.
Duke Thieroff
Fill your hands, you SOB!
I'll offer up a couple of dead mice and some nice handwriting ....
Hmmm.
DEAL!
Just use that nice handwriting on a check made out to me.
Chris
Chris J.
Addicted to ArboristSite
MiracleRepair
ArboristSite Guru
Still needing some 034 parts, and I'm gonna annoy you guys till you find me some.
Need carb and operator presence lever.
I have a 61 rancher project, needs rubber lines, top cover and clutch cover. will run on mix in carb.
Have a few 55 parts.
Eccentric, haven't forgotten you, just out of batteries for the camera and keep forgetting to pick up more. Sd25 pops and runs on mix in carb, fuel line is trashed, haven't checked the 316 yet.
Need carb and operator presence lever.I have a 61 rancher project, needs rubber lines, top cover and clutch cover. will run on mix in carb.
Have a few 55 parts.
Eccentric, haven't forgotten you, just out of batteries for the camera and keep forgetting to pick up more. Sd25 pops and runs on mix in carb, fuel line is trashed, haven't checked the 316 yet.
Eccentric
Mister Wizard
Still needing some 034 parts, and I'm gonna annoy you guys till you find me some.
I have a 61 rancher project, needs rubber lines, top cover and clutch cover. will run on mix in carb.
Have a few 55 parts.
Eccentric, haven't forgotten you, just out of batteries for the camera and keep forgetting to pick up more. Sd25 pops and runs on mix in carb, fuel line is trashed, haven't checked the 316 yet.
10-4. No big hurry. Whenever you get to it...
