Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I could probably buy a case and coil from a 371k for 50 bucks plus shipping for you... I know my local had decent case that last week. I'm sure I could scrounge up a coil to go with it.
 
For a 575xp, wrap handle and the spring a/v mounts that attach the tank to the engine, oh and a recoil. I have a bunch of 576 recoils, and a silver bar/clutch cover. For huskys, not sure what it fits, has captured nuts. I'll look for a part number on it later.

Bump, and I also need the airfilter cover for a Solo 665. I think a 6400 or makita will work, so if any of you put a HD setup on and want to help me out..........
also I think one of the 576recoils will work on my 575
 
Also need a chain guide and a fan shroud for the 575. For trade I have pieces from a 55, 350 and another 575. I used a 50 and 55 to make one runner, a 345 & 350 to make one runner, now gonna take two 575's to make one, so Im going to have some spare parts.......
 
Also need a chain guide and a fan shroud for the 575. For trade I have pieces from a 55, 350 and another 575. I used a 50 and 55 to make one runner, a 345 & 350 to make one runner, now gonna take two 575's to make one, so Im going to have some spare parts.......

New, those wrap handles are right at about $100. I'm modifying a used 372 full-wrap for my 575...
 
Also need a chain guide and a fan shroud for the 575. For trade I have pieces from a 55, 350 and another 575. I used a 50 and 55 to make one runner, a 345 & 350 to make one runner, now gonna take two 575's to make one, so Im going to have some spare parts.......

Theres 4 570 parts saws down by Tbone neck of the woods for $122 asking price. ;)
 
Anyone got a clutch drum and matching oiler gear for a Stihl 015 in 3/8 pitch? Got a great running 015 with 1/4 pitch. :(

If it's the same gear used in the 020 good luck finding one in 3/8, I bought the last two new ones Stihl had a couple of years ago.
 
NS = Anyone got a clutch drum and matching oiler gear for a Stihl 015 in 3/8 pitch? Got a great running 015 with 1/4 pitch.

If it's the same gear used in the 020 good luck finding one in 3/8, I bought the last two new ones Stihl had a couple of years ago.

There is a seller on another site that has in stock 3/8LP clutch drum for 015 and a oiler gear in stock too. Good prices IMO.
 
Well guys I find myself needing a decent airfilter for a poulan 306/245. CAN'T BELIEVE I DON'T HAVE ONE...
 
uploadfromtaptalk1388341079925.jpg dozer Dan informed me my 372xpw cylinder is a goner. Anyone have a piston and cylinder or cylinder to trade? I have a oem 503758171 272 setup to trade, the 260 carb is included but is not here yet. I have other stuff to trade also.
 
I didn't click on the pic to expand it, just glanced at the small version. If I'd looked a little closer I would have noticed that it was an XL series.
 
Back
Top