stihlgreenman
ArboristSite Member
Im just wondering what you guys try to cut your rounds for firewood at? Im thinking of two sizes a small size like 15-16 inch and a 20-22 inch. Also how do you measure your rounds?
What's Your Length???
- Thread starter stihlgreenman
- Start date
Help Support Arborist Forum:
Whew.. Scared me for a minute,Thought it was something else. I have no clue what i cut it on. I know about what my stove can take and just cut by eyesight. Every now and then i'll cut one that is too long.
z50guru
errr..
That just opens up the floor dont it :hmm3grin2orange:
Well once I get my splitter built I will cut it 30" long. Where I get most of my wood it's all butt ends at a log yard and I have no control over the length. Some may be 24" and some may be only 6", they are all mostly 30" across and up!
If I get into some actual trees that I have to cut I would like to cut them 30" and split rather fine (easier for me to handle them). My firebox is 38" in depth.
If I get into some actual trees that I have to cut I would like to cut them 30" and split rather fine (easier for me to handle them). My firebox is 38" in depth.
If I know its going in my or FIL's owb (read junkier wood) then 20-24" eyeball measurement method. Better stuff that might get sold gets closer to 16". The owb's will eat 16" food so nothing goes to waste.
Blazin
Addicted to ArboristSite
24", but mine can take 52". You gotta ease into it 
stihlgreenman
ArboristSite Member
That got us lookin!!!
Anyways yeah, I sell some firewood for fun and the old people to save them from having to do it or pay a lot. My Amish made wood burner box is 22 inches deep and i cut my wood at 18-19 inches. All i sell though is 15-16 inches, and was wondering if yall had any buyers that liked longer ones:wink2: or you yourself did?
Anyways yeah, I sell some firewood for fun and the old people to save them from having to do it or pay a lot. My Amish made wood burner box is 22 inches deep and i cut my wood at 18-19 inches. All i sell though is 15-16 inches, and was wondering if yall had any buyers that liked longer ones:wink2: or you yourself did?
memory
ArboristSite Guru
I cut everything at 20", either use tap and cut to measure it or just a stick and marking paint. One reason we cut to 20" lengths is because we can stack 6 rows in our woodshed almost perfectly. And with our OWB, we can fit two rows in there without going under the exhaust. It also depends on how big of a stove you have. We do not sell any wood at all. If we did, I would probably cut to 16".
If you stack all of your wood, I think it is worth it to mark the cuts. Now I don't mark every single piece I cut. If I am cutting pretty small stuff that does not need to be split, then I will eyeball it. Other than that, I will mark everything.
If you stack all of your wood, I think it is worth it to mark the cuts. Now I don't mark every single piece I cut. If I am cutting pretty small stuff that does not need to be split, then I will eyeball it. Other than that, I will mark everything.
Last edited:
Ironworker
Addicted to ArboristSite
14-15 inches.
FLHX Storm
ArboristSite Guru
I cut the majority of mine to 16 inches using a mechanics type telescoping pickup magnet. I have it marked at 16" and 10" for my neighbor's cook stove with pink duct tape. Then just go along and tap the logs I'll be bucking with the chainsaw. Then go back and cut.
My stove accepts a 24" log (Federal Airtight 288). Regardless, I still cut the logs 18" to 20" and occasionally drop down to 16". Anything shorter than that is a PITA. Any stove MFG that demands a log shorter than 16" should be out of business. That's MHO.
Treebutcher
ArboristSite Lurker
Get a mingo. Baileysonline.com. Thing is awesome. Puts a little paint dot on the log. Can do different lengths. I cut 16". 4'4'8' is a cord. 3 wide easy to stack
Last edited:
trailmaker
ArboristSite Operative
I cut to 14 inches for North South loading. I have a hatchet that is that length so it's a measuring stick and marker.
4seasons
ArboristSite Guru
My saw has a 20" bar so I cut 20" long. Quick 1/4 turn as I step down the log to the next cut works for me. But I did take a Sharpie and made a 16" line on my bar when I went to cut firewood with our church group. Figured that not everyone can burn up to 24" like me so when I cut for someone else 16" is where I cut.
I cut by eye, and when I measure a stack to recon my consistency I am cutting 17-18" on everything. Might have a short one at the end of a log.
thenorth
ArboristSite Operative
I do the 15.75''.....fits both stoves.
Consider This...
Another consideration. If you cut all the logs a hair under 18" long, you will be able to pack 4 rows into a 6' pickup truck box with no waste and the tailgate will close.opcorn:
Another consideration. If you cut all the logs a hair under 18" long, you will be able to pack 4 rows into a 6' pickup truck box with no waste and the tailgate will close.
opcorn:
