wigglesworth
Booned
I think I have a parts saw laying around. Ill look tonight.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I think I have a parts saw laying around. Ill look tonight.
PB
Addicted to ArboristSite
What are you looking for?
2000ssm6
Stihl User
Ummmm, some clutch parts, brake handle, muffler. I was just handed one and sat it on the bench, have not took it apart yet. What ya got?
PB
Addicted to ArboristSite
Sorry don't have any of that. I read it wrong, you need 360, not 390 parts.
2000ssm6
Stihl User
Bowtie
Gearhead
I am looking for a couple brass inserts that go in an 044 cylinder cover. If someone has a trashed 044-046-064-066 cylinder cover I could use the inserts for the bolts.
I also need a clutch cover for an 034-044 style saw (metal, not plastic).
Last but not least, Stihl IPL calls it a "segment", which is the air shroud inside the starter cover for an 064.
I have a new Carlton 20" Husky mount 3/8" bar, a decent P/C for a Husky 365, a filter base for an 064, a coil for a Husky 365/372, LOTS of new crank bearings for a 365/372 series saw, a used 372 muffler, and so much other stuff I cant begin to type...
I also need a clutch cover for an 034-044 style saw (metal, not plastic).
Last but not least, Stihl IPL calls it a "segment", which is the air shroud inside the starter cover for an 064.
I have a new Carlton 20" Husky mount 3/8" bar, a decent P/C for a Husky 365, a filter base for an 064, a coil for a Husky 365/372, LOTS of new crank bearings for a 365/372 series saw, a used 372 muffler, and so much other stuff I cant begin to type...
cjcocn
Tree Freak
If he doesn't have the parts that you need (or all the parts that you need), let me know and I will dig into my saws and see if I have what you require.
I need the choke slide with the thumb button which is used on the S10 tophandle model.
Whats the 041 like for condition? What parts are missing? and is it an AV ?
I would be interested in a complete bow setup for a Poulan 306A or a bow bar for a Poulan 361.
Hahaha, I just threw three of those out.
Bowtie
Gearhead
Sheet happens
Bowtie
Gearhead
Sheet happens
Right on, a person can only keep stuff so long without using it that it becomes necessary to toss it. Then ya need it soon after, LOL!!!
I just read a post that got me to thinking what the heck, its worth a try.
I have an 044 that had the tank/handle replaced with a 440 flippy cap tank. Its in good shape, only minor scratches from normal use. I would like to trade it for an 044 screw in cap tank in similar condition.
I have an 044 that had the tank/handle replaced with a 440 flippy cap tank. Its in good shape, only minor scratches from normal use. I would like to trade it for an 044 screw in cap tank in similar condition.
Bowtie
Gearhead
Still looking for the cyl cover rivets, and looking for starter parts for an 044 (spring cover, pawl washer, and one pawl). Also need a carb for an 034.
Are you talking about the rivets to hold the model plate on? Those are still available from your dealer. I've bought quite a few. PN 0000 974 1000.
Chris Crouse
ArboristSite Operative
Mini Mac Parts Wanted
Hi,
I am searching for a non-chain brake clutch cover from a Mini Mac / Mac 110, 120, 140, etc.
I am also looking for a 12" bar and 12" and 14" 3/8" .050 low profile chain loops for these saws, too.
If you have any of these critters languishing that you wouldn't mind stripping parts off of please message me. I am in the Denver, CO area.
Thanks!
Hi,
I am searching for a non-chain brake clutch cover from a Mini Mac / Mac 110, 120, 140, etc.
I am also looking for a 12" bar and 12" and 14" 3/8" .050 low profile chain loops for these saws, too.
If you have any of these critters languishing that you wouldn't mind stripping parts off of please message me. I am in the Denver, CO area.
Thanks!
Bowtie
Gearhead
I mean the rivets that the screw goes through to attach the cylinder cover.
Bowtie means the little brass bushings part # 0000 963 0808
