Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Johnnie, I only have one extra and I dont want to turn it loose. :laugh:

There are quite a few listed on ebay right now under chainsaw parts, but not real cheap. Just so you know that not all 4400's had 3/8s bar studs but that should be no problem if you find a cover with 5/16" holes. You can just drill them out to 3/8's.

I have seen those on Ebay and I suppose the price isn't to bad since they are NOS, but I am really hoping to get away a little cheaper. I was going to grab one of those NOS chain brake kits until I found a really nice looking bow bar on Ebay the other night, probably over paid for the bow but it is in very good condition but missing one of the chain guards. Suppose I could still use the chain brake cover if I removed the brake parts for now.

KGrHqYOKpUE6UF95f-BOrEgRS3kg60_12.jpg

KGrHqZiIE6IosEzSBOrEgvcNug60_12.jpg
 
I'm looking for a muffler for a 038, I have a good cover I just need the the back half.

The one I have has no exit just the cover has an exit. I could drill a hole in it, just thought someone might have a factory one.
 
I'm seeking a few 026 parts:

Air Filter and Cover
Clutch drum
Muffler Cover

I've got lots of junk.....errr, I mean parts to trade, and I trade labor, cash, or stuff. :)


I'm digging.

So far I've found, lots of mini spline rims, a new aftermarket air filter, and I think I have a decent used clutch drum round here somewhere...
Edit: Found the clutch drum: In good shape. Also found some other stuff, like clutch needle cage and e clip.
Also, I have an 024 filter cover, but it looks to be a little shorter than its 026 counterpart.

Looking for, air filter for a Poulan 3400 countervibe, and a green clutchside cover to match the rest of the saw. The one I have is Yeller.

Here's a pic of the saw;

attachment.php
 
Last edited:
Coyotes everywhere would be lining up to buy it!

I did send a dead mouse to an AS member recently. We should be hearing from him any day now.

:jester:

i wish you hadn't said that warped,, it gives me some ideas:biggrin::biggrin::biggrin::biggrin:
 
I'm digging.

So far I've found, lots of mini spline rims, a new aftermarket air filter, and I think I have a decent used clutch drum round here somewhere...
Edit: Found the clutch drum: In good shape. Also found some other stuff, like clutch needle cage and e clip.
Also, I have an 024 filter cover, but it looks to be a little shorter than its 026 counterpart.

Looking for, air filter for a Poulan 3400 countervibe, and a green clutchside cover to match the rest of the saw. The one I have is Yeller.

Here's a pic of the saw;

attachment.php

I don't have any 3400 parts. :(

Yes the 024 af cover is shorter. I missed two different parts saws on evilbay....they went high as hell. :dizzy: People have lost their damn minds. Nearly 200.00 for a non-running 026????
 
I'm looking for a muffler for a 038, I have a good cover I just need the the back half.

The one I have has no exit just the cover has an exit. I could drill a hole in it, just thought someone might have a factory one.

I believe I have a few new AM 038 mufflers. They were GTG freebies from Baileys. How many do you want?:)
 
I was watching that 026 also. It just makes no sense at all. Then look back at completed items and you can find good running saws that sold for only $150:msp_confused: What the hell???


Jimbo

I don't have any 3400 parts. :(

Yes the 024 af cover is shorter. I missed two different parts saws on evilbay....they went high as hell. :dizzy: People have lost their damn minds. Nearly 200.00 for a non-running 026????
 
I was watching that 026 also. It just makes no sense at all. Then look back at completed items and you can find good running saws that sold for only $150:msp_confused: What the hell???


Jimbo

Must be the moon cycles or something. :msp_wink:
 
So, are you hunting anything?

Just good deals on big saws:) Bought a Mac 797 last night. I'd love to build a hot rod Mac someday.

I've got a PP455 if anyone's interested. It has a scored piston but I suspect the cylinder could be cleaned up. I haven't pulled it apart yet though.

I could use a decent 372 piston for my uncles 372K concrete saw.
 
I have a Husky 261 i'm willing to trade.
It's a good runner but could use a set of
bar plates and a drum bearing. Chain brake
band is gone as well.

I'm looking for a really nice top end for a Sachs Dolmar 120SI




Lee
 
I'm digging.

So far I've found, lots of mini spline rims, a new aftermarket air filter, and I think I have a decent used clutch drum round here somewhere...
Edit: Found the clutch drum: In good shape. Also found some other stuff, like clutch needle cage and e clip.
Also, I have an 024 filter cover, but it looks to be a little shorter than its 026 counterpart.

Looking for, air filter for a Poulan 3400 countervibe, and a green clutchside cover to match the rest of the saw. The one I have is Yeller.

Here's a pic of the saw;

attachment.php


i had a clutch cover but i sold it to a other AS member but i got some more parts for a 3800 poulan
 

Latest posts

Back
Top