395xp Build

[AUSSIE1]

I didn't measure, I'll take a side by side pic so you can see.

Not a biggie Will, more is more.

 

[parrisw]

Here ya go, you ask and shall recieve. Looks to be about .110" total more so .055 either side.

This pic shows the total amount, the other side is parallel with each other.

 

[AUSSIE1]

Thanks mate, that is significant. That piston combined with the lowering of the cyl is well on the way to a healthy 395.

 

[parrisw]

Thanks mate, that is significant. That piston combined with the lowering of the cyl is well on the way to a healthy 395.

LOL, ya. My hoarding problem may be coming back real bad if ya know what I mean. I saw the guy today and told him he will be getting a ported saw, he was grinning. But if this thing runs too good, well I duno!!!!!!!!!! Oh and crown thickness is .135, so you could do a mean popup with this piston. I got a 395xpw here that is next, I may do a popup with that one, on a Meteor piston.

 

[AUSSIE1]

Yeah that matched with some good No's will make a beast.

 

[parrisw]

Yeah that matched with some good No's will make a beast.

Ya, I'm already thinking of what to do to the next one. Can't wait. Also looks like another 394xp coming as well, so we'll see what I can do with that as well.

 

[willysmn]

394 and 395 porting

I'd be interested in what you decide to do to the 394xp.

 

[parrisw]

I'd be interested in what you decide to do to the 394xp.

Ya me too!! LOL

 

[parrisw]

Well folks!! She's all done! Well, sorta. Spent the majority of the morning assembling the whole saw LOL, had to borrow the muffler and gasket off my 394 since I didn't have that alu plate to go behind the muffler, I might just leave this muffler on here though since its already ported, and also had to borrow a recoil starter off another saw until I fix the one that belongs to this.

Vids are uploading now, but will be a while since they are very large HD vids.

I think it runs pretty good, only just got a quick tune on it now, set to 13K and still 4stroking nicely, 7t sprocket, full comp off the roll LGX. My 371 I just did I think cuts right with this 395 in this size of wood!! Though it has an 8t rim

Here are some pics.

Carb and parts just out of the Ultrasonic cleaner.

 

[parrisw]

 

[parrisw]

Okay here is the first vid, one more to come.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Xa3np2wjo78&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Xa3np2wjo78&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[parrisw]

Got some files coming to go Square chain, we'll see how I do, hopefully make some faster saw vids.

 

[AUSSIE1]

Good job Will. Did you end up turning the cyl and piston on the saw?

 

[parrisw]

Good job Will. Did you end up turning the cyl and piston on the saw?

Just the cylinder. No popup on this saw. Squish is around .020 I think! LOL

 

[Gypo Logger]

Good thread parrisw, and nice work as well.
John

 

[Gypo Logger]

Okay here is the first vid, one more to come.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Xa3np2wjo78&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Xa3np2wjo78&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

She's a ripper! Nice!
John

 

[parrisw]

Good thread parrisw, and nice work as well.
John

She's a ripper! Nice!
John

Thanks John. Wish I had some bigger wood to test in.

 

[Gypo Logger]

Thanks John. Wish I had some bigger wood to test in.

Ship it to me, I'll find some big wood to slice and dice. You'll need my 154. Lol
Gypo

 

[parrisw]

Ship it to me, I'll find some big wood to slice and dice. You'll need my 154. Lol
Gypo

Paypal me $600 and its yours!! LOL That is if my buddy doesn't want it.

Here is another vid. Still processing, so quality will improve in a few minutes.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/1-WO7IKK8VU&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1-WO7IKK8VU&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[Gypo Logger]

Paypal me $600 and its yours!! LOL That is if my buddy doesn't want it.

Here is another vid. Still processing, so quality will improve in a few minutes.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/1-WO7IKK8VU&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1-WO7IKK8VU&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

That would be a deal if I had the green or needed the saw. 600.00 sounds cheap. It's probably worth at least 800.00.
John