Huztl FarmerTec 070 Build Thread with upgrade info and completed saw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ok that's the 070 kit. So maybe the info about them shipping from here on the kits are wrong. I can tell you it happened a number of times recently. So they keep us guessing. Good info to have

kit info & packing lists @ http://thechainsawkitguy.com
 
Been running 404. .063And its an 090 bar already. So I can just unbolt the old mac and put this on. I will do the 090 cylinder kit next week or so after some of my ebay auctions end and I get some more play funds.
 
I have yet to get tracking on my decomp. I really look forward to getting that the mushrooms will eat my log up. kit info & packing lists @ http://thechainsawkitguy.com

What source did you find for your valve? My only solution has been to make a insert like a spark plug insert and use the Husky type that are readily available. Thanks
 
Got my 070 kit from hutzl and my 070 Decomp from Germany yesterday! Pretty darn stoked. Dang this saw is huge! Cannot wait to get it built and milling.IMG_20180515_090728.jpg IMG_20180515_090803.jpg
 
Got my 070 kit from hutzl and my 070 Decomp from Germany yesterday! Pretty darn stoked. Dang this saw is huge! Cannot wait to get it built and milling.View attachment 652313 View attachment 652314

Yes it is big heavy and bulky. I do not use mine for any milling, but maybe after some time it will do do some milling. For now it is supposed to cut logs and it has changed the entire process because of how effectively it has performed. Since the chain speed is much slower it can go through a whole cord with out any chain touch up. Last week I cut some fully green trees and it went through two cords with out touching up the chain at all. Am wondering what to buy buy now likely another 070 or 066. If the decomp comes apart it will destroy the entire saw quick. Do not use the enclosed circle clips. I machined a wider groove and put more heavy duty clips with a touch of brass to keep them intact. Thanks
 
Yes it is big heavy and bulky. I do not use mine for any milling, but maybe after some time it will do do some milling. For now it is supposed to cut logs and it has changed the entire process because of how effectively it has performed. Since the chain speed is much slower it can go through a whole cord with out any chain touch up. Last week I cut some fully green trees and it went through two cords with out touching up the chain at all. Am wondering what to buy buy now likely another 070 or 066. If the decomp comes apart it will destroy the entire saw quick. Do not use the enclosed circle clips. I machined a wider groove and put more heavy duty clips with a touch of brass to keep them intact. Thanks
The clips you are referring to.... The wrist pin clips?
 
Uuuhhhggg! I know they marked the add right after I bought that they where going to be away for awhile so questions and if you bought would be delayed. Wonder if this is why they did not get right back yet.
I resent it. there are two messages in the history. If I don't get it I will get my money back and try again and maybe have it worked by fall. [emoji53]

kit info & packing lists @ http://thechainsawkitguy.com
 

Latest posts

Back
Top