Making some 044, 064, 066 Dogs. . .

[Trx250r180]

Hope this does it!!

Check that the teeth align in the front (coplanar) -- and if the mounts are good, it's good 2 go!

these mounts look real close if i set orig template on top of printout ,tips are slightly shorter ,if you cut out one i emailed it hopefully will show the slight difference 1/8 inch maybe on bottom tip

 

[Metals406]

these mounts look real close if i set orig template on top of printout ,tips are slightly shorter ,if you cut out one i emailed it hopefully will show the slight difference 1/8 inch maybe on bottom tip

Checking the dogs against each other -- spike distance to distance on the 044 (the first drawn) and the newest 461, is around .007" variance.

So I'd venture to guess my first try with the 461 was a little wider like the 460 outer, but will line up good with the inner, which is shared by them all?

This is why having a PH here is helpful for this kinda thing. . . Anyone wanna give me a 461? :msp_biggrin:

 

[Trx250r180]

just eyeballing across the last cardboard one i cut out looks spot on sending another batch of pics holes need go to the left about 1/2 a hole View attachment 288572View attachment 288573View attachment 288574

i like the curve between the mount holes you did

 

[Metals406]

these mounts look real close if i set orig template on top of printout ,tips are slightly shorter ,if you cut out one i emailed it hopefully will show the slight difference 1/8 inch maybe on bottom tip

Oh, I see what yer saying on the catcher hole! That was in the right spot, I just erased the wrong one during adjustment.

Let me fix that, then I think it'll be good, yeah?

 

[Metals406]

 

[Metals406]

By God I hope this one is on the money -- then the 461 will be done as well. :msp_smile:

 

[tdi-rick]

I get 36 mm Rick (inside, inside) measurement between dogs for roller length. There's at least a little adjustment there because of the Nyloc nut on the outside. That would only buy you some on the dog thickness though.

Cheers Nate. 37mm for the Dolkita

 

[Metals406]

Cheers Nate. 37mm for the Dolkita

That's certainly workable then.

 

[redoakneck]

I put a stihl roller catcher on a 7900 with pro safety dogs and it fit fine.

 

[Trx250r180]

i sent a few emails ,last one final fit is perfect ,was much easier to template this using a 460 dog than the 440 View attachment 288638View attachment 288639

 

[Metals406]

i sent a few emails ,last one final fit is perfect ,was much easier to template this using a 460 dog than the 440 View attachment 288638View attachment 288639

Email sent for some confirmation numbers, then this one is done!

 

[Metals406]

Anybody feeling froggy and want to grab me some measurements on a 200t dog? opcorn:

 

[Metals406]

Sounds like the 461 template fits like a glove!!

So, for the guys wanting a set, let me know!!!!! (Hopefully Brian and I didn't just waste a crapload of time).

I'm fix'n to order, will be sending PM's to everyone.

 

[Jacob J.]

Anybody feeling froggy and want to grab me some measurements on a 200t dog? opcorn:

I can do that tonight if you like.

 

[Metals406]

I can do that tonight if you like.

Thanks mang! Me and Cody just got done doing the 200t this afternoon.

These are available with this order (if'n ya hurry) -- Cody is gonna try one of the 4-points to see if he likes it better than the wimpy stock ones.

A guy doesn't always need to dog into a limb or top, but then again, sometimes he does.

 

[Rudolf73]

Thanks mang! Me and Cody just got done doing the 200t this afternoon.

These are available with this order (if'n ya hurry) -- Cody is gonna try one of the 4-points to see if he likes it better than the wimpy stock ones.

A guy doesn't always need to dog into a limb or top, but then again, sometimes he does.

Cooool :cool2:

 

[ptjeep]

I'll take one for the 200 if it aint to late. Should look purdy on my rear handle:msp_thumbsup:

 

[Metals406]

I'll take one for the 200 if it aint to late. Should look purdy on my rear handle:msp_thumbsup:

It ain't too late Preston. . . I'll send ya a PM.

You mean the 4-point right?

 

[ptjeep]

Yep 4 point.

 

[Metals406]

I will be closing acceptance of new requests today at 11:00 am (Mountain Time). That will give me enough wiggle room to get these things coming.

Not to say I might not do this again in the future, but I have to nip it in the bud at some point for now, or they'll never get ordered.