KG441c
Keith
Kenjax the offroad is way cheaper but I emailed motul tech for their recommendation on the 2 but both are designed for watercooled engines. Belray h1r included
Masterminded 362c 87 octane vs 94
- Thread starter KG441c
- Start date
Help Support Arborist Forum:
HuskStihl
Chairin'em for the sound
Y'all have your thinking caps on too tight. "Motor oil is motor oil" (for the oldies out there)
KG441c
Keith
I dont buy it. Ive seen 2 stroke oils that soot and carbon things up and some that burn better and have better lab results such as film strength? Ill go with lab results and results ive seen with my own eyes and share it and if someone gets something from it or teaches me something great
Trx250r180
Saw polisher
KG441c
Keith
U must be real old??? Lol! Sorry I dont remember thoso
KG441c
Keith
So the old ones used premix and crankcase oil?
Termite
Time To Launch
What's wrong with Bailey's synthetic? I got 5 gallons with free shipping!
HuskStihl
Chairin'em for the sound
Trx250r180
Saw polisher
Yes i am old ,look at muh picture ,no crankcase oil ,the mix was motor oil
sunfish
Fish Head
No, motor oil mixed with gas. It was that way for quite a long time with early two strokes.
What's wrong with Bailey's synthetic? I got 5 gallons with free shipping!
Nothing. I just won't buy anything from them any more after they kicked grande Dogg and the others to the curb.
Termite
Time To Launch
I haven't bought anything from Bailey's in a long time. The oil is pretty old! Do it get stale?
I have found better sources for parts and supplies now.
I have found better sources for parts and supplies now.
VinceGU05
PSA vitim.
That motul 800 is expensive as here. $35 a litre. H1r is $23 . Same shop. This shop also had the best price on eBay too. $125 for 4 litre of motul.
I think I will stick to my Mobil 1. Got 11 litres of it. Should last a few years [emoji12]
I think I will stick to my Mobil 1. Got 11 litres of it. Should last a few years [emoji12]
RiverRat2
Serio Tree Freak
Actually some of the oldest you had to soak a couple of dinosaur turds in your fuel can for a week,,, or longer. Then you squeezed tha oil right out of em and mixed them @ 16:1
with what ever gas you could find cause it was all good **** back then!!!! & did I mention we didn't have a Stinkin EPA telling us to put corn and soybeans in our gas!!!! Just sayin,,, If ya Don't believe it!!! ask Go Log it!!!!!!! He was there!!!!Too bad I just paid half of that Shipped from http://www.rockymountainatvmc.com/ $63.99 for 4 L Jug cant beat it!!!
RiverRat2
Serio Tree Freak
Yeah really,,, Thanks big guy for the Tip on the Motul pre mix from Utah!!!
KG441c
Keith
Thought Id share what Motul technical support had said. Neither Motul 800t oils are designed for chainsaw and they didnt recommend it. They make a chainsaw specific oil but isnt offered in the US. He ask what was the application and the duty of chainsaw and I told him around 11000 rpm and only a few seconds between cuts. He then said Motul 800t road racing was designed for higher rpm continous duty and thats what he recommended over the offroad. Kenjax guess your dealer recommended the right oil to u. Looks like road racing motul has about 2x better film strength than off road but Ronnie is checking data with tech support on that as we speak to be sure
Keith, I have a question for you, or a few? When you tried the AMSoil Saber, what ratio did you run?
Also, it has the FD rating, that is the best, correct? Do you know what ratio got that rating?
Thanks.
Also, it has the FD rating, that is the best, correct? Do you know what ratio got that rating?
Thanks.
KG441c
Keith
They recommend 100 to 1 but I mixed 50 to1 and after 1 use there was soot everywhere. I wouldnt run 100 to1 but thats me
KG441c
Keith
Mike Amsoil says it exceeds
mike amsoil says it exceeds fd but they choose not to participate in the Jaso testing and not published on their bottle if I remember correctly
