sefh3
Addicted to ArboristSite
I have a 2 or 28" bar from a Homelite 750. Would that have the mount your looking for?
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I have a 2 or 28" bar from a Homelite 750. Would that have the mount your looking for?
sefh3
Addicted to ArboristSite
That should be 27" or 28".
T
Teddy.Scout
Guest
335-338xpt parts
Any one building or working on 335-338xpt's
Have what is shown left over.
NOTE: case housings have issues, one is trashed with good bits and pieces and the other is fixable with some mending. The motor some one just rebuilt with new ring and so-called bearings but who knows.
Sure the tid-bits can be used by some one. so plan on the motor being shot!
Any one building or working on 335-338xpt's
Have what is shown left over.
NOTE: case housings have issues, one is trashed with good bits and pieces and the other is fixable with some mending. The motor some one just rebuilt with new ring and so-called bearings but who knows.
Sure the tid-bits can be used by some one. so plan on the motor being shot!
Eccentric
Mister Wizard
That's indeed the right mount. Would you like to part with the rest of the saw Scott? Was worth a try....:jester:
Any D196 Homelite mount bar that's .063G (instead of .050G) is going to have a .404 sprocket tip (unless it's a RN or HN of course). 93DL in that length indicates that he's talking 3/8" chain. Is your bar .404? Johnnie could always change out the sprocket tip if it is.....
Last edited:
Sorry Chris, I must have gave them away already. :bang:
jimbo1490
ArboristSite Guru
I have sent 3 different people with late model Stihls with a failed coil to the dealer to complain. The coils are supposed to have a lifetime warranty. In all three cases, the dealer got them a new coil on the factory's dime.
Jimbo
I could help ya out on that..... It is even a 2011 model coil. Got a buddy who strips brand new saws and parts them out so this one is a new take-off part, though I did install it on my 372xp just to make sure it worked.
jimbo1490
ArboristSite Guru
This is a real long shot but I'm looking for a Husqvarna 3120 clutch cover and air filter cover. I have a lot to trade but would probably buy outright.
diggers_dad
Sawchologist
That is great information. I'll give that a try on Monday. I know one dealer locally and have done a lot of buying / trading from another one an hour or so away. Thanks!
dd
Scooterbum
Addicted to ArboristSite
1972-75 Suzuki TM250
Thanks Scoot!A lot older than I thought it would be LOL Would you like to have it?
o8f150
Tree Freak
I could help ya out on that..... It is even a 2011 model coil. Got a buddy who strips brand new saws and parts them out so this one is a new take-off part, though I did install it on my 372xp just to make sure it worked.
thanks to roanoker i have a coil on the way,, your a good man john
041 AV buffer # 1110 790 9600
I am in need of the above to finish a very nice 041.I have 028.025/MS250,335XPT,Husky 55/51 parts to trade.
I also have some new assemblies listed on Feebay(truly a correct name now) that have not moved,if anyone needs/wants them,PM me to see if we can work something out.
I cannot get the pics to upload for the Stihl NOS crankcase,#1120 021 0700 and 0800.I think it is for a 009/010/011 and 012,per the chart from Saw Garage.
The NOS handle and tank assembly is for a John Deere/Echo saw,part/casting numbers on the assembly are 97288/97287.I THINK it fits a JD 550CS,not sure of the Echo equivalent.
RayView attachment 204069View attachment 204070
I am in need of the above to finish a very nice 041.I have 028.025/MS250,335XPT,Husky 55/51 parts to trade.
I also have some new assemblies listed on Feebay(truly a correct name now) that have not moved,if anyone needs/wants them,PM me to see if we can work something out.
I cannot get the pics to upload for the Stihl NOS crankcase,#1120 021 0700 and 0800.I think it is for a 009/010/011 and 012,per the chart from Saw Garage.
The NOS handle and tank assembly is for a John Deere/Echo saw,part/casting numbers on the assembly are 97288/97287.I THINK it fits a JD 550CS,not sure of the Echo equivalent.
RayView attachment 204069View attachment 204070
Bailey's has the nice stock dual-dawg set new for $15...
Scooterbum
Addicted to ArboristSite
Hey Buddy !!
They do make a mighty fine ashtray
Even back in the days of runnin' dirt bikes I wasn't fond of the TR's, too squirley in the turns.
Eccentric
Mister Wizard
Hey Buddy !!
They do make a mighty fine ashtray
Even back in the days of runnin' dirt bikes I wasn't fond of the TR's, too squirley in the turns.
The TM400 Cyclone was a FAST death trap.:msp_scared:
o8f150
Tree Freak
these are free to good home,, just pay the shipping,,,,,,, these are husky 50 parts,,, the crank case has the crank,rod and rear handle assembly,, bearings feel tight,, tank and case are in good shape,,,,, then there is the front handle and also clutch,,drum,,rim sprocket and bearing,, these are free to a good home but i just ask to pay the actual shipping
