Need a good OEM MS460 front handlebar if anyone has a extra.
Let me know if you have one and we can work something out.
Let me know if you have one and we can work something out.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
forestryworks
Addicted to ArboristSite
lookin' for an 066 wrap handle, OEM; used or new.
Brian13
Addicted to ArboristSite
Just trying again I dont need this filter kit.
parrisw
Tree Freak
Just got a Makita 6401, looking for a 7900 top end. Have stuff to trade, lots of New Stihl parts.
Mastermind
Work Saw Specialist
Still needing a 359 jug.
bowtechmadman
Addicted to ArboristSite
I have an 026 Pro and a 290 pro up for trade. Looking for Partner 5000Plus/5000, Husky 242xp, 254xp, 266xp. Dolmar or Makita 64000.
I'm looking for a 088 coil, PN 1124 400 1309, and a 084/088 carb, HT-1A, HT-3A, HT-5A, HT-7A, HT-12A. PM me if you have something.
Saw Dr.
Junk Collector
Could you please post a pic of the 290 PRO? I'm thinking you meant 260 pro? Or maybe just 290?
Hey guys, I have a mix matched coil/flywheel combo on one of my 064's. It explains the ignition problems I have had. So I either need to find a proper coil or flywheel.
The coil I need is a the "dog-legged" CDIC, rev-limited version. PN 1122 400 1300
Or I could use a unlimited flywheel, flywheels with any of these PN's should work, 1201, 1203, and 1207, and maybe some more. I have a metal flywheel off of a Red Light 066 but it doesn't fit well on the taper and the fins are too wide for my starter housing.
The coil I need is a the "dog-legged" CDIC, rev-limited version. PN 1122 400 1300
Or I could use a unlimited flywheel, flywheels with any of these PN's should work, 1201, 1203, and 1207, and maybe some more. I have a metal flywheel off of a Red Light 066 but it doesn't fit well on the taper and the fins are too wide for my starter housing.
Bowtie
Gearhead
I have one.
Actually, the 1122 400 1300 dogleg coil is not rev-limited. That one is made by Bosch. The CDIC coil is the rev-limited coil, # 1122 400 1303. It's the "shoebox" coil because it's shaped like the box that your British Knights came in.
So yah, you need the 1201, 1203 (dual slot), or 1207 flywheel.
bowtechmadman
Addicted to ArboristSite
Yep, sorry guys so much for trying to type at 2am, 026Pro and a 290 that has an 029 handlebar. Both saws run out well. I'll try and get some pictures up tonight.
I have a 1201 for Epick but also found a 1204. Jake do you know what that fits? Has "made in YU" on it. Mike
Mike- The 1204 flits the 064 that has the CDIC rev-limiting coil. I'm not sure what "Madein YU" is...
little possum
Crash and Burn
Any Homelite 921 parts out there? Just bout need a whole saw for the handles 
But it runs, lol
But it runs, lol
Stihlofadeal64
Addicted to ArboristSite
throwing my hat in the door....
I know this is near blasphemy here but I'm looking for an 029 parts saw or even a 039 parts saw. PM me if you have one complete or a partial saw in decent condition. Thanks
I know this is near blasphemy here but I'm looking for an 029 parts saw or even a 039 parts saw. PM me if you have one complete or a partial saw in decent condition. Thanks
SawGarage
Addicted to ArboristSite
Also need a husky brake lever for an inboard clutch husky (362,372, 385, 390)
part # 537-00-87-01 could also use the plastic cover piece over the brake spring as well.
trades (parts) avail or green:
man am I RETARDED sometimes... yes, I need it for a 371/372xp.
that would be awesome if you have one... I did find an ebay kit, but i really don't need any other brake parts
Jay
Tommy,
What parts do you need. Got a 29 in the shop. Shoot me a PM or email me.
Thanks
Bob
