Iowa 2015 Fall GTG (October 17, 2015)
- Thread starter nstueve
- Start date
Help Support Arborist Forum:
Homelite410
Hack with a CNC Mill
Homelite410
Hack with a CNC Mill
Anytime Nate.
I haven't sealed the ends on my wood that I milled and have had no issues. I'm sure it is a debate that will cause problems among the ranks. I think if you have it stored in a stead environment it is less of an issue than if it was in an area that has large temp swings.
Sent from somewhere
Sent from somewhere
Yes definitely! Big thanks to them for the big boy toys!
Sent from my iPhone using Tapatalk
For MS170 & 250s, yes. The others can be useful.
Why anyone would spend big bucks for a 30cc saw when you can get a Box store Poulan beats me.
$10 solution and they work great and respond well to muffler mods with full adjust carbs!
http://www.ebay.com/ulk/itm/181331228757
Sent from my iPhone using Tapatalk
I replaced the Zama with an adjustable Walbro on another MS170. Downside was I had to drill a hole to adjust idle speed and tweek the throttle and choke linkage to make things work. Not to mention remove the air filter holder to adjust the mixture.
Well, it was a Hong Kong carb..........[emoji6]
Well, it was a Hong Kong carb..........[emoji6]
Yep I know! I think it's worth it to have full adjustment though.
Sent from my iPhone using Tapatalk
Time's Standing Stihl
ArboristSite Operative
Thanks again to the hosts Nate & Erica! It was a beautiful day to get together with a bunch of friends and make some chips fly!
Thanks to all the generous people that donated items for the raffle and the other people putting in the extra time and effort to make this happen! I wish life wasn't so busy so I could've made it over Friday night to socialize around the fire, but it was still great catching up with everyone Saturday!
Hope everyone had safe travels on their way back home
Thanks to all the generous people that donated items for the raffle and the other people putting in the extra time and effort to make this happen! I wish life wasn't so busy so I could've made it over Friday night to socialize around the fire, but it was still great catching up with everyone Saturday!
Hope everyone had safe travels on their way back home
Big thanks goin out to Nathan and Carl(millermodsaws)and whoever else had anything to do with the prize saw.
I will get a better report when i get some more run time on it.
I think a good time was had by all.
Couldnt have ask for a better day,it was wonderful.
I will get a better report when i get some more run time on it.
I think a good time was had by all.
Couldnt have ask for a better day,it was wonderful.
The rim drive drum for the Poulan 3300 was in the mailbox when I got home Sat. evening. Now he has a more practical bar/chain
Still waiting for the handle cover so we can get rid of the masking tape and jumper wire.[emoji12]
Still waiting for the handle cover so we can get rid of the masking tape and jumper wire.[emoji12]
Homelite410
Hack with a CNC Mill
Big thanks to those who helped me get Nathans backhoe going! This is power draining the tank!
At last! A real use for a leaf blower!. Here is another shot
Sent from my iPhone using Tapatalk
From a distance it looked like they were trying to turbo charge or use the Stihl as a blower and really make that backhoe DIG!!!
