Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Stihl Stuff: 050 051 075 076

Here's a list if anyone is interested...

I believe all of the parts are New Stihl OEM:

1111 141 0502 - Filter Cover
1111 791 1906 - Front handle bracket?
1111 791 1907 - Front Handle bracket?
1111 120 1602 - 3 each - Air Filters
1111 036 9115 - 6 Each Rewind/recoil Washers
1111 182 1001 - 2 Each Triggers ("Stihl 3" is stamped below the part number)
1111 ??? ???? - Looks like a choke lever
 
Cover shipping I'll send the whole saw.

Thanks for the offer, but it looks like Carl has the coil.

If you don't want the powerhead from Scooterbum, I have one I can salvage for the coil.

I'm shure the postage on the coil would be less than the whole thing.

I'll pitch the rest. Been looking for a good excuse. It's taking up valuable 'Homelite space'.
Carl.

Sounds good. PM sent.
 
Looking for some bits.
372- nice clutch cover,air filter,unlimited coil, recoil
Homelite 900D- Starter assembly(brass cup on flywheel)
Homelite 360-intake boot
Homelite 540/8800/cs550-choke knob
Homelite SXLA-both copper oil lines
385xp builder or get rid of the ported, milled top end I have for one.


Lots to trade (especially in Homelite NOS) and green
 
Looking for some bits.
372- nice clutch cover,air filter,unlimited coil, recoil
Homelite 900D- Starter assembly(brass cup on flywheel)
Homelite 360-intake boot
Homelite 540/8800/cs550-choke knob
Homelite SXLA-both copper oil lines
385xp builder or get rid of the ported, milled top end I have for one.


Lots to trade (especially in Homelite NOS) and green

Mitch I may have the SXL-A copper oil lines for you. I'll have to pull down a parts saw to see if what's on there is any good. May not get to it for a few days though. This week's pretty packed...:dizzy:
 
If it's a Makita DCS 520i or a Dolmar 111 I have the clutch cover with the (working) chain brake stuff inside. Nice, but not perfect. I can send you a picture tonight when I get home from work to make sure it's the one you need if you like. It's yours for the shipping if you need it.

Any chance you have a cylinder for an Echo 400?

dd

Is that an older Echo or late model?

Jimbo
 
Mitch I may have the SXL-A copper oil lines for you. I'll have to pull down a parts saw to see if what's on there is any good. May not get to it for a few days though. This week's pretty packed...:dizzy:

No rush. Lining up the ducks, that's all.
Thanks
 
Also have a Dolmar ps34 runner, complete up for trade


Chris


Hey, ya Jackrabbit! I'll send ya one of these for that PS34:

mousetrapwithdeadmouse16638.jpg
 
Still looking for some stihl parts...

290 clutch, sproket and clutch cover.

025 style clutch cover.

Let me know what you have.

Thanks.
 
Listen here Mr. F dash dash dash lips....








Dead mice are your category, not mine.



Now go down to Billy Jim's bar, the cornhole tournament is starting in 45 minutes.

I'm sure you'll win first place.


Chris
 
Listen here Mr. F dash dash dash lips....








Dead mice are your category, not mine.



Now go down to Billy Jim's bar, the cornhole tournament is starting in 45 minutes.

I'm sure you'll win first place.


Chris

They have tournaments?????:ices_rofl:
 

Latest posts

Back
Top